joining small moulding
-
- Posts: 75
- Joined: Sun 12 Feb, 2012 3:52 pm
- Location: berkhamsted
- Organisation: Hook Framing
- Interests: Gardening.local history
joining small moulding
Some time ago I had a small tool that sat in front of the Fence on my Minigraf 44. It was two small lengths of metal joined by a swivel which when placed up against the fence it formed a lower fence it was great for small mouldings that sit lower than the standard fence. I have made a couple of wooden ones but they never worked as well as the metal one. Does any one know where I can buy one
- David McCormack
- Posts: 1442
- Joined: Tue 02 Aug, 2011 10:14 am
- Location: South Lakes
- Organisation: Framing
- Interests: Cycling, walking, darkroom photography and laughing a lot!
- Location: Cumbria
- Contact:
Re: joining small moulding
This the Cassese equivalent, it may work on your machine?
"You know, there's a right and wrong way to do everything!"
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
-
- Posts: 75
- Joined: Sun 12 Feb, 2012 3:52 pm
- Location: berkhamsted
- Organisation: Hook Framing
- Interests: Gardening.local history
Re: joining small moulding
That's the one David, thanks for your help. Have a good Christmas
- David McCormack
- Posts: 1442
- Joined: Tue 02 Aug, 2011 10:14 am
- Location: South Lakes
- Organisation: Framing
- Interests: Cycling, walking, darkroom photography and laughing a lot!
- Location: Cumbria
- Contact:
Re: joining small moulding
And you
"You know, there's a right and wrong way to do everything!"
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
-
- Posts: 268
- Joined: Thu 14 Apr, 2016 3:07 pm
- Location: Aberdeen
- Organisation: Rosie's Framers and Crafts
- Interests: Framing, mental health, martial arts
Re: joining small moulding
I just thought that was part of the underpinner, been sat on my cassesse since I started here! Didn't even think about taking them off!David McCormack wrote:This the Cassese equivalent, it may work on your machine?
- David McCormack
- Posts: 1442
- Joined: Tue 02 Aug, 2011 10:14 am
- Location: South Lakes
- Organisation: Framing
- Interests: Cycling, walking, darkroom photography and laughing a lot!
- Location: Cumbria
- Contact:
Re: joining small moulding
kartoffelngeist wrote:Didn't even think about taking them off!
I bet if you take it off now and then need it later for a small moulding, you won't be able to find it again
"You know, there's a right and wrong way to do everything!"
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/