Search found 369 matches

by David
Mon 12 Aug, 2024 7:49 pm
Forum: Help!
Topic: Getting Bevel Cuts Right - Ultimat Futura
Replies: 6
Views: 2233

Re: Getting Bevel Cuts Right - Ultimat Futura

Hi, on each stop, top and bottom, there are small round adjusting knobs to extend or reduce the cut. If it is under cutting you need to extend the cut so turn the knob in the + direction to reduce an overcut turn towards the -. There is a video on the Keencut website. https://www.keencut.com/video/u...
by David
Thu 18 Jul, 2024 11:05 am
Forum: Help!
Topic: Aluminium box frame
Replies: 4
Views: 3078

Re: Aluminium box frame

It depends how deep you want to go. This is a method I used for deep box frames with an Ali frame. It also means you can put very thin frames on large pictures because the timber frame and box is the main strength of the construction, the actual frame is a bit of decoration on the front. 1000014371....
by David
Mon 08 Jul, 2024 8:01 pm
Forum: Help!
Topic: Ultimate Futura T-Bar / Slideway
Replies: 6
Views: 2784

Re: Ultimate Futura T-Bar / Slideway

Do you have any photos? I'm not understanding the issue?
by David
Thu 08 Feb, 2024 5:57 pm
Forum: General Discussion
Topic: A thread of gratitude
Replies: 6
Views: 3108

Re: A thread of gratitude

Congratulations. All the best and don't forget to have fun. Exciting times.
by David
Wed 24 Jan, 2024 10:21 pm
Forum: General Discussion
Topic: What extra ‘must have’ equipment would you recommend?
Replies: 25
Views: 10249

Re: What extra ‘must have’ equipment would you recommend?

If the underpinner isn't pneumatic upgrade it, to go with the compressor. A good air staple gun. Two cordless drills one with a drill bit the other with a 'Philips' head so you're not constantly changing them. I use Makita very reliable get a spare battery too. Decent vacuum, I use a Dyson, again ve...
by David
Tue 31 Oct, 2023 11:03 am
Forum: General Discussion
Topic: Do you photograph your finished frames? If so, do you publish them?
Replies: 22
Views: 269242

Re: Do you photograph your finished frames? If so, do you publish them?

I photograph my pieces before I put the glass in, fully assembled just without the glass.
by David
Tue 19 Sep, 2023 7:11 pm
Forum: Announcements
Topic: Art Print & Framing Expo - Stratford Upon Avon 24th September
Replies: 7
Views: 15078

Re: Art Print & Framing Expo - Stratford Upon Avon 24th September

I'll be there or I better be, I'm demonstrating mount cutting on the Keencut Futura and giving a talk in the afternoon. Come and say hello.
by David
Fri 18 Aug, 2023 4:43 pm
Forum: The Good, The Bad, And The Ugly
Topic: THAT FRIDAY FEELING!
Replies: 126
Views: 1098361

Re: THAT FRIDAY FEELING!

IMG-20230817-WA0006~2.jpeg
This one turned out really well, quadruple mount including the German flag and carbon fibre frame.
by David
Thu 01 Jun, 2023 12:34 pm
Forum: Help!
Topic: Foil / alu wrap mouldings
Replies: 4
Views: 7868

Re: Foil / alu wrap mouldings

Horrible stuff isn't it. Yes, remove the plastic film, the moulding marks/scratches very easily so careful once it has been removed. A trick I was told for flat versions is to cut it upside down, it gives a cleaner cut on the surface rather than a slight crush on the aluminium. I used it a couple of...
by David
Thu 27 Apr, 2023 1:21 am
Forum: Help!
Topic: STRAIGHT CUTTING WITH NEW FUTURA
Replies: 7
Views: 9964

Re: STRAIGHT CUTTING WITH NEW FUTURA

Not sure what is happening here? If the board is a regular thickness, around 1.5mm the double 012 blade should be fine, it's what I generally use. Normally if it's not cutting through just extend the blade until it is cutting about half way through the slip mat, I assume you are using a slip under t...
by David
Tue 18 Apr, 2023 7:29 am
Forum: Help!
Topic: Newbie question about Melinex/Mylar to frame a magazine
Replies: 9
Views: 9438

Re: Newbie question about Melinex/Mylar to frame a magazine

Another little tip (and expense) if you don't already have them is to get some cotton gloves. When using sheet material I don't like getting finger prints all over the surface so wear gloves, I also use them whenever handling the roll for the same reason. Not such an issue if cutting straps.
by David
Tue 04 Apr, 2023 9:13 pm
Forum: Technology - CMC's Computers Etc
Topic: Which CMC is better and CMCs with Vacuum bed or without.
Replies: 8
Views: 9349

Re: Which CMC is better and CMCs with Vacuum bed or without.

Hi Ama First, I’ve had a Gunnar since 2008 (I think - it’s a long time ago), still got it, never regretted it and still think I made the right choice. 1. Gunnar – I have an F1 Hybrid, an F1 was on here very recently for £3500. The newer Aiox will be around £25K if you also need a computer and compre...
by David
Mon 03 Apr, 2023 10:14 am
Forum: Adverts/Sales/Wants
Topic: Gunnar F1 Mount Cutter on Ebay £3500 - Collect London
Replies: 2
Views: 5571

Re: Gunnar F1 Mount Cutter on Ebay £3500 - Collect London

That is a very very good price for a Gunnar assuming no issues, they are well engineered and built to last. Brilliant machine. See if you can get the compressor too. If you are thinking of getting a CMC give this a serious look. Doesn't seem to have the hybrid head.
by David
Fri 24 Mar, 2023 9:28 pm
Forum: The Good, The Bad, And The Ugly
Topic: THAT FRIDAY FEELING!
Replies: 126
Views: 1098361

Re: THAT FRIDAY FEELING!

A couple of excellent pieces today - Jim & Justin, love the rounded corners, here’s my contribution. These are part of an RAF set using a lot of different mounting techniques. Some of these jobs can be quite deep so I like to break the depth up with various layers and spacers. Originally I had a...
by David
Mon 20 Feb, 2023 10:57 am
Forum: The Good, The Bad, And The Ugly
Topic: THAT FRIDAY FEELING!
Replies: 126
Views: 1098361

Re: THAT FRIDAY FEELING!

This is last weeks job for the Royal Engineers with inlayed top mount in the Regimental colours and ID patch.
IMG_6192A.jpg
by David
Mon 13 Feb, 2023 7:57 pm
Forum: The Good, The Bad, And The Ugly
Topic: THAT FRIDAY FEELING!
Replies: 126
Views: 1098361

Re: THAT FRIDAY FEELING!

This was a late Friday piece and I also had to remove the names, which is why the name tag looks like a white strip, so afraid it's a bit late. The bottom mount is a cut out of the Navy white ensign. It's the Royal Engineers this week.
IMG_6168B.jpg
by David
Tue 24 Jan, 2023 5:46 pm
Forum: The Good, The Bad, And The Ugly
Topic: Framing for critique
Replies: 18
Views: 45780

Re: Framing for critique

Hi Matt First off well done it looks a good piece of framing and well done for putting it up for discussion. I think the frame, mount size and colour proportions are good, certainly wouldn’t go larger on the mount. I do however bottom weight just about everything usually 5mm. I also very rarely sing...
by David
Fri 13 Jan, 2023 5:56 pm
Forum: The Good, The Bad, And The Ugly
Topic: THAT FRIDAY FEELING!
Replies: 126
Views: 1098361

Re: THAT FRIDAY FEELING!

My contribution via the Royal Marines.
IMG_5544A.jpg
IMG_5531 (2).JPG
IMG_5548.JPG
by David
Thu 12 Jan, 2023 10:14 pm
Forum: Announcements
Topic: New topics in The Good, The Bad & The Ugly
Replies: 2
Views: 6968

Re: New topics in The Good, The Bad & The Ugly

What an excellent idea, both of them. I'm doing a couple of pieces happy to share. Well done on the new initiative.
by David
Mon 05 Dec, 2022 7:46 pm
Forum: The Good, The Bad, And The Ugly
Topic: Some frames I've made this year.
Replies: 13
Views: 22284

Re: Some frames I've made this year.

They are terrific, well done.