Thanks guys,
that's been really helpful.
I don't think he'll want to spend that much as well as I really don't want to do all that, as there are 3 that are damaged.
I think at this point he's better off getting what he can for them.
Thanks again
Matt
Search found 33 matches
- Wed 30 Jan, 2019 9:38 am
- Forum: Help!
- Topic: Help with finding this mount
- Replies: 8
- Views: 3430
- Tue 29 Jan, 2019 9:51 am
- Forum: Help!
- Topic: Help with finding this mount
- Replies: 8
- Views: 3430
Help with finding this mount
Hi all,
I've had this picture come in with water damage to the mount, is it possible to get a replacement mount.
Its one of 6 so they would ideally all match, he's wanting to take them to auction.
Any help would be appreciated.
Matt
I've had this picture come in with water damage to the mount, is it possible to get a replacement mount.
Its one of 6 so they would ideally all match, he's wanting to take them to auction.
Any help would be appreciated.
Matt
- Sun 07 May, 2017 10:35 am
- Forum: Help!
- Topic: Help to find this moulding
- Replies: 0
- Views: 1514
Help to find this moulding
Hi Had a request for a floater frame, from a US client and has asked me to see if I can find a moulding the same as he uses, unfortunalty I've not bee able to find it here, wondered if any of the more experencied amounst you might know if its avaible here. clip_image001.jpg clip_image002.jpg This on...
- Wed 18 Mar, 2015 5:18 pm
- Forum: Help!
- Topic: Help with finding moulding
- Replies: 5
- Views: 2802
Re: Help with finding moulding
Thanks for the link, that's the one..
Tried calling Simons today but couldn't get through, my problem now is I only need a length (2.4m) and I don't know if they do a chop.
but I'll give them another call tomorrow.
Thanks for all your help
Matt
Tried calling Simons today but couldn't get through, my problem now is I only need a length (2.4m) and I don't know if they do a chop.
but I'll give them another call tomorrow.
Thanks for all your help
Matt
- Wed 18 Mar, 2015 8:02 am
- Forum: Help!
- Topic: Help with finding moulding
- Replies: 5
- Views: 2802
Re: Help with finding moulding
Thanks for that, unfortunately I don't have a Simons catalogue and there website is 'Coming Soon' so can't really verify.
But I'll give them a ring.
Thank you.
Matt
But I'll give them a ring.
Thank you.
Matt
- Tue 17 Mar, 2015 5:08 pm
- Forum: Help!
- Topic: Help with finding moulding
- Replies: 5
- Views: 2802
Help with finding moulding
Hi all
Me again, it seems to be that time of year when everybody likes to give me a challenge, and want something framed like they had years ago.
Anyway if anybody knows this moulding and where I might get it, if it's still available. Thanks Again
Matt
Me again, it seems to be that time of year when everybody likes to give me a challenge, and want something framed like they had years ago.
Anyway if anybody knows this moulding and where I might get it, if it's still available. Thanks Again
Matt
- Wed 04 Feb, 2015 5:07 pm
- Forum: Help!
- Topic: Help with finding a moulding.
- Replies: 5
- Views: 2832
Re: Help with finding a moulding.
Thanks both I remember Byron closing as I just started up on my own and was getting the Corri-Cor from them, couldn't remember why though so thanks. I think I'll be giving this search up as a lost cause, but thanks for all your help and a bit of a trip down memory lane. Really gotta hang out a bit m...
- Tue 03 Feb, 2015 5:09 pm
- Forum: Help!
- Topic: Help with finding a moulding.
- Replies: 5
- Views: 2832
Re: Help with finding a moulding.
Richard your a bloody star.
I thought it might be an Acid finish, but couldn't remember who did them.
My god Byron that's a name from the past, didn't think they were around any more, their phone number is dead so maybe not.
Thanks again.
Matt
I thought it might be an Acid finish, but couldn't remember who did them.
My god Byron that's a name from the past, didn't think they were around any more, their phone number is dead so maybe not.
Thanks again.
Matt
- Tue 03 Feb, 2015 3:39 pm
- Forum: Help!
- Topic: Help with finding a moulding.
- Replies: 5
- Views: 2832
Help with finding a moulding.
Hi
I've been asked to try and match a frame, but for the life of me I can't find the moulding anywhere.
if anybody knows what moulding this is and where I can order it, that would be really great.
Thanks
Matt
I've been asked to try and match a frame, but for the life of me I can't find the moulding anywhere.
if anybody knows what moulding this is and where I can order it, that would be really great.
Thanks
Matt
- Fri 23 Sep, 2011 4:19 pm
- Forum: General Discussion
- Topic: Does anyone know where to get this moulding
- Replies: 8
- Views: 2622
Re: Does anyone know where to get this moulding
Nice moulding that but in the event you cannot get it again how about one of the Aegean range from Arqadia's Larson-Juhl range. One of the colours has a matching slip. Could not help noticing the mismatch between frame and slip in your photo. Thanks for the idea of using Aegean from Arqadia, In my ...
- Thu 22 Sep, 2011 4:28 pm
- Forum: General Discussion
- Topic: Does anyone know where to get this moulding
- Replies: 8
- Views: 2622
Re: Does anyone know where to get this moulding
@Steve I thought it might be from Byron, in which case I'll give up looking thanks.
@Graysalchemy I remember that fish stand! that was some time ago.
@Graysalchemy I remember that fish stand! that was some time ago.
- Wed 21 Sep, 2011 3:55 pm
- Forum: General Discussion
- Topic: Does anyone know where to get this moulding
- Replies: 8
- Views: 2622
Does anyone know where to get this moulding
Hi.
Used to use this years ago when I worked for another framer, can't remember where they got it from or if it's still available. Does anyone have any ideas.
Thanks in advance.
Matt
Used to use this years ago when I worked for another framer, can't remember where they got it from or if it's still available. Does anyone have any ideas.
Thanks in advance.
Matt
- Sun 09 Jan, 2011 4:17 pm
- Forum: General Discussion
- Topic: Springfair 2011
- Replies: 7
- Views: 2121
Re: Springfair 2011
We'll be there on the Sunday.
Staying in Banbury, cheaper & only an hour from NEC.
Staying in Banbury, cheaper & only an hour from NEC.
- Fri 05 Feb, 2010 8:20 am
- Forum: General Discussion
- Topic: Anyone Know what moulding this is?
- Replies: 3
- Views: 1618
Re: Anyone Know what moulding this is?
Forgot to add that the moulding is only about 25mm wide.
I've not seen it in the flesh all I've got is that photo, and it's a bit miss leading.
But thanks any help would be great.
I've not seen it in the flesh all I've got is that photo, and it's a bit miss leading.
But thanks any help would be great.
- Thu 04 Feb, 2010 5:35 pm
- Forum: General Discussion
- Topic: Anyone Know what moulding this is?
- Replies: 3
- Views: 1618
Anyone Know what moulding this is?
I've been ask to match a frame. Any ideas? img004.jpg I've looked everywhere but am still clueless. :? Sorry for the poor image but the artist brought it in, as it's for one of there customers, and they took the photo. :Slap: Any help would be great, I've found something close which will do but am o...
- Fri 27 Mar, 2009 7:56 am
- Forum: General Discussion
- Topic: Twitter
- Replies: 4
- Views: 1634
Re: Twitter
Glad someone at last replied.
Thought there was just tumbleweed in here for a moment
Matt
Thought there was just tumbleweed in here for a moment
Matt
- Mon 23 Feb, 2009 9:09 am
- Forum: General Discussion
- Topic: Twitter
- Replies: 4
- Views: 1634
Just thought I'd ask if anyone here is on Twitter?
As just about everyone else seems to be.
Matt
As just about everyone else seems to be.
Matt
- Sat 21 Feb, 2009 9:41 am
- Forum: General Discussion
- Topic: Best Sheet Material Cutter
- Replies: 21
- Views: 6539
Re: Best Sheet Material Cutter
Started using it on the 5th Jan, took me a few weeks to get used to it, but now I don't know how I ever managed without one. Took a bit of setting up to get it spot on square. I've also download a prog from the internet that plans out the best way to cut sheets. http://www.optimik.com/ Its pretty go...
- Sun 04 Jan, 2009 1:36 pm
- Forum: General Discussion
- Topic: Best Sheet Material Cutter
- Replies: 21
- Views: 6539
Re: Best Sheet Material Cutter
Hi
Said that I'll let everyone know how I got on with the Keencut.
Other than a major move round of the workshop. Found stuff that I'd forgotten all about, and a small mountain of rubbish later, It's up.
Thank for all the comments and info.
Can't wait to start using it.
Said that I'll let everyone know how I got on with the Keencut.
Other than a major move round of the workshop. Found stuff that I'd forgotten all about, and a small mountain of rubbish later, It's up.
Thank for all the comments and info.
Can't wait to start using it.
- Mon 22 Dec, 2008 9:24 am
- Forum: General Discussion
- Topic: lack of christmas cards
- Replies: 14
- Views: 4365
Re: lack of christmas cards
I've so far had 1 card
But I have had 2 bottles of wine and 4 bottles of beer, thats far better than cards me thinks.
But I have had 2 bottles of wine and 4 bottles of beer, thats far better than cards me thinks.