The Framers Forum

Looks like this but sizes don't match https://www.arqadia.co.uk/productdetail ... =441600000

Looks like a Mainline polcore one
http://mainlinemouldings.com/index.php? ... x=0&go.y=0

We buy tags from Morplan, we mainly use the 7mm 71306 and 11mm T tags 71312. The 11mm ones go through the shirt foam board and mount all in one go, discretely placed of course

Wera pz1 are good bits, not the cheapest but last well.

We also use Arqadia bright white, plus Alphamat whites, but when we need one a little more stark Colourmount 371 is the one we use.

Frinton also do one that is very similar http://www.frintonmouldings.com/M03029

Whoops got the Arqadia number the wrong way around, should have been 287167000

Try Arqadia 287000167 or Simons BOXX/5

Mark Griffiths is probably your nearest 07859 818233, also Neil Stout who is a good distance away from you but would travel 07793 709123

Nice one, that's a lot of frames.

We did some for them about 18 months ago when they were in Bury, also did some for Peter Andre's 60 minute makeover they did near us last year as well, but not nearly as many as you did.

Well done.

80 teeth or more, negative rake and cut across fairly fast, that should do it. Cutting across slowly will melt it.

Also the quality of the moulding will have a great impact on the quality of cut.

We use these guys
http://www.foamboard-store.co.uk/

We usually use the lace holes and fix with narrow cable ties of an appropriate colour, although they aren't normally visible. Two is enough in each boot. Level the back of the board with foamcore.

Iqbal brothers turn out to be not such nice guys after all.

Have a look at this:
Greater-manchester-news/slaves-trafficked-eastern-europe

Thanks Pedro, I have seen that today and made an enquiry.

Yes, I've been looking for over a year. No joy yet, so thought I'd ask on the off chance.

Looking to buy a decent Cassese 969 saw if anyone knows of one for sale.

Thanks.

Yes, we've been asked to frame one as well. I also managed to order one before they all went. Had an email the other day to say they start shipping them at end of November, but could be early next year before they get them all sent out.

We had same problem, it went on for quite some time. Really annoying as 9 times out of 10 you don't see the little buggers until you have cut the mount. We changed from Colourmount to Arqadia but still had the same trouble. Turns out the face papers for both are made by the same company. In the end ...

If you fill out the request form on the Brevetti website they will send you a download of the manual in English.

http://www.brevettimotta.com/public/ind ... 7&Itemid=1