try a firm called conservation by design
google the name and the site will come up I'm sure
haven't searched their site but they are great for conservation products
Search found 302 matches
- Fri 24 May, 2013 1:28 pm
- Forum: Help!
- Topic: Linnen Adhesive
- Replies: 7
- Views: 2870
- Sat 18 May, 2013 9:59 am
- Forum: General Discussion
- Topic: guillotine v framer cutting18mm mdf strips fastest
- Replies: 5
- Views: 2678
Re: guillotine v framer cutting18mm mdf strips fastest
Pine does do that it was the same when running through the moulder/planer spent more time cleaning cutters and blocks than running the profile we could make something in Tulip Tulip has the least of the timbers in de gassing/acid migration and is very stable- not too expensive either A bit more than...
- Fri 17 May, 2013 3:57 pm
- Forum: General Discussion
- Topic: guillotine v framer cutting18mm mdf strips fastest
- Replies: 5
- Views: 2678
Re: guillotine v framer cutting18mm mdf strips fastest
using mdf might be an issue from an acid migration point of view
it is highly acidic and could stain the canvas later on
I do agree with prospero that it would be quite bendy so an extra centre support would help that but could add to the time you may save
PM me and I may be able to help
it is highly acidic and could stain the canvas later on
I do agree with prospero that it would be quite bendy so an extra centre support would help that but could add to the time you may save
PM me and I may be able to help
- Fri 17 May, 2013 1:24 pm
- Forum: General Discussion
- Topic: Frinton frames/large swepts
- Replies: 9
- Views: 3551
Re: Frinton frames/large swepts
note to Dave- I have sent a PM to you Frinton Gallery have nothing to do with the Wessex Group. Frinton mouldings was a spin off trade operation of the former Midas Mouldings which A.L.Younger aka Wessex, took over. Frinton Gallery was taken over by their accountants son about 10 years ago (or about...
- Thu 16 May, 2013 3:29 pm
- Forum: Help!
- Topic: double mitre saw trouble
- Replies: 10
- Views: 2968
Re: double mitre saw trouble
really appreciate the contact
Neil was a good chap to speak with
Thanks Again
Tim
Neil was a good chap to speak with
Thanks Again
Tim
- Thu 16 May, 2013 3:26 pm
- Forum: General Discussion
- Topic: Frinton frames/large swepts
- Replies: 9
- Views: 3551
Re: Frinton frames/large swepts
hi Yes Me!
call me on 01743 245975
we make authentic swept frames using original Victorian moulds
if you PM me I can e mail you with a few images
Tim
Kingswood
call me on 01743 245975
we make authentic swept frames using original Victorian moulds
if you PM me I can e mail you with a few images
Tim
Kingswood
- Thu 16 May, 2013 9:18 am
- Forum: Help!
- Topic: double mitre saw trouble
- Replies: 10
- Views: 2968
Re: double mitre saw trouble
just to say thanks
problem sorted
found a huge chunk of moulding hidden deep in side the saw
problem sorted
found a huge chunk of moulding hidden deep in side the saw
- Tue 14 May, 2013 3:54 pm
- Forum: Help!
- Topic: double mitre saw trouble
- Replies: 10
- Views: 2968
Re: double mitre saw trouble
where about is the sensor
we're going to have a look in the morning for bits of wood stopping the blade from returning
Thanks for this
Appreciate it
we're going to have a look in the morning for bits of wood stopping the blade from returning
Thanks for this
Appreciate it
- Tue 14 May, 2013 12:21 pm
- Forum: Help!
- Topic: acrylic glazing
- Replies: 8
- Views: 2965
Re: acrylic glazing
Take a look in lion catalogue page 51
they sell scoring tools but you could get the scoring blades for a Stanley knife
we have had our scoring tool for years, always a handy thing to have around
they sell scoring tools but you could get the scoring blades for a Stanley knife
we have had our scoring tool for years, always a handy thing to have around
- Tue 14 May, 2013 12:18 pm
- Forum: Help!
- Topic: double mitre saw trouble
- Replies: 10
- Views: 2968
Re: double mitre saw trouble
oh no.
he mentioned something about the front sensor in an e mail
we will be speaking wed pm and he is going to talk me through it
if it works, I will post up what we did. wish us luck??!!
he mentioned something about the front sensor in an e mail
we will be speaking wed pm and he is going to talk me through it
if it works, I will post up what we did. wish us luck??!!
- Mon 13 May, 2013 3:11 pm
- Forum: Help!
- Topic: double mitre saw trouble
- Replies: 10
- Views: 2968
Re: double mitre saw trouble
Thanks for the contact
Tim
Tim
- Mon 13 May, 2013 10:46 am
- Forum: Help!
- Topic: double mitre saw trouble
- Replies: 10
- Views: 2968
double mitre saw trouble
I have a Cassese double mitre saw and the left hand saw blade sticks after the cut, including the compressed air fed pads to hold the moulding, and the blade doesn't return until you switch off all power Has anyone had this before and solved it or does anyone know of a service company to give it an ...
- Sat 11 May, 2013 1:27 pm
- Forum: General Discussion
- Topic: CUSTOMERS Don't you just love them?
- Replies: 7
- Views: 3324
Re: CUSTOMERS Don't you just love them?
just like dave, I would have charged £30 per hour and taken two hours with a tea break.
you have to love Ikea. no matter how good or bad a framer you are- Ikea makes us all look amazing!!!
you have to love Ikea. no matter how good or bad a framer you are- Ikea makes us all look amazing!!!
- Wed 08 May, 2013 11:28 am
- Forum: Help!
- Topic: Does anyone recognise this moulding?
- Replies: 4
- Views: 2568
Re: Does anyone recognise this moulding?
it may be Rose and hollis A160
I would say it's an obeche moulding with a black stain and wax
Try a brown wax over a black stain
gives a bit more warmth to the finish
Tim
Kingswood Frames
I would say it's an obeche moulding with a black stain and wax
Try a brown wax over a black stain
gives a bit more warmth to the finish
Tim
Kingswood Frames
- Tue 07 May, 2013 3:36 pm
- Forum: Help!
- Topic: Three more gilding questions
- Replies: 3
- Views: 2059
Re: Three more gilding questions
Hi There applying gesso by brush will always fall and clog up detail so getting an even coating is very difficult. As Jerome mentions you can use different shaped pieces of metal to re shape the profile and the old age woodcarvers wood sometimes have frames back to them to re-carve. If not, sandpape...
- Thu 02 May, 2013 10:36 am
- Forum: Adverts/Sales/Wants
- Topic: Raw wood moudlings
- Replies: 0
- Views: 1204
Raw wood moudlings
If anyone wants a small run of a special moulding in any timber please PM me.
also hand made swept frames and picture and frame restoration/re gilding
Tim @ Kingswood
also hand made swept frames and picture and frame restoration/re gilding
Tim @ Kingswood
- Sat 27 Apr, 2013 12:23 pm
- Forum: Help!
- Topic: meg at sisslings
- Replies: 0
- Views: 1073
meg at sisslings
Does anyone know what happened at Edward Henry
we use to supply them a few years ago and just found out they have since gone which is such a shame
trying to get hold of Meg if possible if she is still operating in the trade
we use to supply them a few years ago and just found out they have since gone which is such a shame
trying to get hold of Meg if possible if she is still operating in the trade
- Sat 27 Apr, 2013 11:41 am
- Forum: Help!
- Topic: moulding type
- Replies: 4
- Views: 2046
Re: moulding type
give me a call and I can make a short run of what you need in any timber and size
square profiles are fairly simple to make
Tim
Kingswood
square profiles are fairly simple to make
Tim
Kingswood
- Sat 27 Apr, 2013 11:37 am
- Forum: Help!
- Topic: Yet another moulding ID test for you all!
- Replies: 5
- Views: 2430
Re: Yet another moulding ID test for you all!
Hi Tim
I make this moulding
how much do you need?
give me a call on 01743 245 975 mon - sat 10 am - 5 pm
Tim
Kingswood Frames
I make this moulding
how much do you need?
give me a call on 01743 245 975 mon - sat 10 am - 5 pm
Tim
Kingswood Frames
- Sat 27 Apr, 2013 11:33 am
- Forum: Help!
- Topic: Help! - Moulding out of Stock
- Replies: 9
- Views: 3160
Re: Help! - Moulding out of Stock
Hi Alan,
if lion let you down and cannot fix a date when it will be in, send me a piece and we will see if we can make some, will have to make one whole frame but would be glad to help and get customer happy
it would be a raw wood section that needs finishing
Tim
Kingswood Frames
if lion let you down and cannot fix a date when it will be in, send me a piece and we will see if we can make some, will have to make one whole frame but would be glad to help and get customer happy
it would be a raw wood section that needs finishing
Tim
Kingswood Frames