Framing a series of original Hogarth prints

Post examples...
Of framing styles or techniques that rocked your boat, and also of those that didn't
Post Reply
vintage frames
Posts: 1349
Joined: Tue 12 Jun, 2012 6:05 pm
Location: West Wales
Organisation: https://www.dermotmcardle.co.uk/
Interests: Making picture frames
Contact:

Framing a series of original Hogarth prints

Post by vintage frames »

This is a about a recent job I did to frame a set of twelve original Hogarth prints.

The customer was restoring an 18th cent. house and had several sets of Hogarth prints which were to be hung within a period setting.

The first set of prints was a series of twelve called "Industry and Idleness" and charts the differing careers to two apprentices, one industrious who progresses to become lord mayor of London, the other a bit idle and less fortunate, ending up hung at Tyburn.

IMG_3297.JPG

The prints had been historically trimmed close to the image so then had to be float mounted in order to show all of the image. In this instance I floated them on to a raised piece of mountboard and squared up the whole assembly with a narrow internal water gilded slip. This also served to separate the paper from the glass.
Where the underlying mountboard was visible in the background, I coloured it with watercolours to match with the tone of the prints.


IMG_3304.JPG


The frames are best described as 18th century Hogarth sanded slip frames. The inner section is a flat pine frame on which a compo ornament is laid and surrounded with an area of sanded texture. To press out compo castings for one or two frames is fun enough. To do it for a series of twelve is a day spent grinding away with some grim determination.

IMG_3294.JPG


The whole was then given a coat of gesso and oil gilded over a yellow base.

The outer section was made from ebonised fruitwood, distressed toned and waxed. I used fruitwood because it has a very close grain which polishes beautifully and requires no filling or priming. However, fruitwood is very expensive and the way to do it is to cut thin slats of the fruitwood and glue these onto a pine base - a good old R&H pine stretcher. Then the profile is cut into the top surface of the fruitwood and the remaining base wood trimmed to form the rest of the moulding. And this is actually the way the original frames were produced.

IMG_3298.JPG

For the glazing, I used reclaimed antique picture glass as this had loads of interesting blisters and imperfections.
Affordable Gilding Course for Professional Framers-https://www.dermotmcardle.co.uk/
https://www.instagram.com/dermotmcardle/
Not your average framer
Posts: 11014
Joined: Sat 25 Mar, 2006 8:40 pm
Location: Devon, U.K.
Organisation: The Dartmoor Gallery
Interests: Lost causes, saving and restoring old things, learning something every day
Location: Glorious Devon

Re: Framing a series of original Hogarth prints

Post by Not your average framer »

Hi Dermot,

WOW! Those are beautiful, just really nice! What a nice job! Really well done! :clap: :clap: :clap:

I do quite a bit of older looking stuff, but I work to a less demanding standard, it's a case of having too, and particularly since my stroke, it makes a lot of sense to work within my limitations. However, I still manage to do things which impress the customers. Some of my finishes are just painted, or painted and washed, then waxed. For speed I set the wax, using my hot air gun, which results in a very even smooth wax finish and is also great for hiding any slight gaps here and there.

A lot of my older looking stuff is produced using stacked mouldings and this often can look quite like real antique frames. I like too produce some of these older looking frames in pairs, or even in sets, with old bookplate type prints framed within these frames. Old nursery rhyme prints in sets seem to sell quite well. There's alway a lady who wants stuff like that for her homes nursery, or childrens bedrooms. I find that ladies often go for the old fashioned, victorian style stuff. It's very rare that men buy anything like this these days, although they used to at one time, but that was a long time ago!
Mark Lacey

“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
vintage frames
Posts: 1349
Joined: Tue 12 Jun, 2012 6:05 pm
Location: West Wales
Organisation: https://www.dermotmcardle.co.uk/
Interests: Making picture frames
Contact:

Re: Framing a series of original Hogarth prints

Post by vintage frames »

Thanks Mark.

They want a load more - I should be happy ..
but it's going to be a week of squeezing out compo.
Affordable Gilding Course for Professional Framers-https://www.dermotmcardle.co.uk/
https://www.instagram.com/dermotmcardle/
fusionframer
Posts: 600
Joined: Thu 02 Sep, 2010 8:16 pm
Location: Badminton
Organisation: Fusion Picture Framing
Interests: framing
Location: Badminton

Re: Framing a series of original Hogarth prints

Post by fusionframer »

Beautiful job Dermot. Thanks for posting.

Nick
www.fusionframing.co.uk

Never trust a dog with orange eyebrows.
vintage frames
Posts: 1349
Joined: Tue 12 Jun, 2012 6:05 pm
Location: West Wales
Organisation: https://www.dermotmcardle.co.uk/
Interests: Making picture frames
Contact:

Re: Framing a series of original Hogarth prints

Post by vintage frames »

Thanks Nick.

Really pleased you found it interesting.
Affordable Gilding Course for Professional Framers-https://www.dermotmcardle.co.uk/
https://www.instagram.com/dermotmcardle/
User avatar
StevenG
Posts: 1147
Joined: Thu 31 Jan, 2013 8:01 am
Location: Tyrone, N.Ireland
Organisation: Featurepiece Frames
Interests: Movies, always trying to get things better, Wasting money on things I don't need, reading stuff on here, eating sandwiches & being thankful for the small things
Contact:

Re: Framing a series of original Hogarth prints

Post by StevenG »

That's just a stunning piece of work :) Very nice indeed :clap: :clap:
vintage frames
Posts: 1349
Joined: Tue 12 Jun, 2012 6:05 pm
Location: West Wales
Organisation: https://www.dermotmcardle.co.uk/
Interests: Making picture frames
Contact:

Re: Framing a series of original Hogarth prints

Post by vintage frames »

Thankyou.
Much appreciated.
Affordable Gilding Course for Professional Framers-https://www.dermotmcardle.co.uk/
https://www.instagram.com/dermotmcardle/
User avatar
Orde02
Posts: 147
Joined: Wed 04 Sep, 2019 9:31 pm
Location: East Lothian
Organisation: Northwood Framing
Interests: Painting, flying, cycling

Re: Framing a series of original Hogarth prints

Post by Orde02 »

Looks great Dermot!
vintage frames
Posts: 1349
Joined: Tue 12 Jun, 2012 6:05 pm
Location: West Wales
Organisation: https://www.dermotmcardle.co.uk/
Interests: Making picture frames
Contact:

Re: Framing a series of original Hogarth prints

Post by vintage frames »

Thanks Matt.
You should show more of your ripple and tabernacle frames. Really innovative work.
Affordable Gilding Course for Professional Framers-https://www.dermotmcardle.co.uk/
https://www.instagram.com/dermotmcardle/
User avatar
Orde02
Posts: 147
Joined: Wed 04 Sep, 2019 9:31 pm
Location: East Lothian
Organisation: Northwood Framing
Interests: Painting, flying, cycling

Re: Framing a series of original Hogarth prints

Post by Orde02 »

Thanks Dermot.

I've been quite busy recently with plenty of interesting projects. I'll post something now.

Matt
Post Reply