Who the Hell do Mircrosoft think they are

Computerised Mount Cutters, Computers, other gadgetry.
Post Reply
User avatar
Steve N
Posts: 2992
Joined: Sat 21 Jul, 2007 2:32 pm
Location: Somewhere Staple Hill Bristol
Organisation: Frontier Picture Frames ltd
Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
Location: Now in Bristol
Contact:

Who the Hell do Mircrosoft think they are

Post by Steve N »

Half way through cutting a mount on the valiani and the computer stops and start installing window 10 !!!!!!!!!!!!!!!!!!!!
now after 1 1/2 hours (lost production ) it's finished installing, now can't get the valiani software to work
anyone know a good lawyer to so sue Microsoft :head: :head: :head: :head: :head:
Steve CEO GCF (020)
Believed in Time Travel since 2035

Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
User avatar
Tudor Rose
Posts: 1117
Joined: Wed 10 Mar, 2010 4:07 pm
Location: Dawlish, South Devon
Organisation: The Framing Lot
Interests: Tudor history, swimming, walking and needlework.
Contact:

Re: Who the Hell do Mircrosoft think they are

Post by Tudor Rose »

We had that happen on one of our machines, luckily not the CMC as it took ages to install just like yours did. We couldn't understand how it had happened as we were careful to always close down the pop up boxes, but on this particular day the pop up had given 2 choices - schedule for installation that day, or reschedule for a convenient time. The person turning on the PC hadn't read it, they'd just closed the pop up box. That left the default as install that day, so that's what it did! No way to undo it but luckily it hasn't caused any problems.

We did check with our pricing software company in case of problems, but that works on Windows 10 so that's fine. And we checked with Valiani Support Group (aka Merlin :) ) and that was all fine too. The only problem would be if you were still using FMD as that isn't supported anymore, but if you upgrade to V-Studio that should work.

Hope you get it sorted :xcomputer:
Jo Palmer GCF(APF) Adv
Textile, Mount Design & Function & Conservation


Forum Moderator & Framing Educator
www.pictureframingtraining.com
Guild Certified Examiner & Guild Accredited Trainer
Guild Master from May 2019 to May 2022
User avatar
Steve N
Posts: 2992
Joined: Sat 21 Jul, 2007 2:32 pm
Location: Somewhere Staple Hill Bristol
Organisation: Frontier Picture Frames ltd
Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
Location: Now in Bristol
Contact:

Re: Who the Hell do Mircrosoft think they are

Post by Steve N »

Hi
Managed to get V-Studio to work, but every time we are in Smart Cut, and try to open up a file , get a error that smart cut has stopped work and need to close,
so we have to open each file in create then send to cut, :xcomputer: :xcomputer: :xcomputer: :xcomputer:

Going have to roll back over the weekend as can't afford any more down time
Steve CEO GCF (020)
Believed in Time Travel since 2035

Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
User avatar
JohnMcafee
Posts: 1145
Joined: Sun 10 Oct, 2010 9:58 am
Location: Belfast
Organisation: Scenes
Interests: Picture Framing
Putting the world to rights
Location: Belfast
Contact:

Re: Who the Hell do Mircrosoft think they are

Post by JohnMcafee »

I have installed GWX Control Panel on those computers that I do not wish to "upgrade" to Windows 10.

Works a treat.
"A little learning is a dangerous thing"

(Also known as John, the current forum administrator)
User avatar
Steve N
Posts: 2992
Joined: Sat 21 Jul, 2007 2:32 pm
Location: Somewhere Staple Hill Bristol
Organisation: Frontier Picture Frames ltd
Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
Location: Now in Bristol
Contact:

Re: Who the Hell do Mircrosoft think they are

Post by Steve N »

Cheers John, going to install that before Microsoft attacks my other computers
Steve CEO GCF (020)
Believed in Time Travel since 2035

Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
simoonez
Posts: 159
Joined: Sat 09 Jul, 2011 4:09 pm
Location: North Dorset
Organisation: Dorset Framing
Interests: pasties

Re: Who the Hell do Mircrosoft think they are

Post by simoonez »

Ours installed halfway through printing. It's complete madness, I wish I'd known how to stop it before. No matter how many times you click No Thanks, it just goes ahead without permission.
User avatar
StevenG
Posts: 1147
Joined: Thu 31 Jan, 2013 8:01 am
Location: Tyrone, N.Ireland
Organisation: Featurepiece Frames
Interests: Movies, always trying to get things better, Wasting money on things I don't need, reading stuff on here, eating sandwiches & being thankful for the small things
Contact:

Re: Who the Hell do Mircrosoft think they are

Post by StevenG »

JohnMcafee wrote:I have installed GWX Control Panel on those computers that I do not wish to "upgrade" to Windows 10.

Works a treat.

Brilliant, great find John, it works a treat indeed :) :clap:
Graysalchemy

Re: Who the Hell do Mircrosoft think they are

Post by Graysalchemy »

I have got the answer, having my old laptop rebuilt with windows 7 back on it and an ssd to give to the wife and making sure the replacement has windows 7 on it.
User avatar
Steve N
Posts: 2992
Joined: Sat 21 Jul, 2007 2:32 pm
Location: Somewhere Staple Hill Bristol
Organisation: Frontier Picture Frames ltd
Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
Location: Now in Bristol
Contact:

Re: Who the Hell do Mircrosoft think they are

Post by Steve N »

Rolled back to Windows7 and downloaded GWX Control Panel, now everything is at peace with the world :rock:

Might try sending Microsoft an invoice for loss of production time of 3 hours :giggle: :giggle:
Steve CEO GCF (020)
Believed in Time Travel since 2035

Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
Graysalchemy

Re: Who the Hell do Mircrosoft think they are

Post by Graysalchemy »

You will probably find that they have a get out of jail free card which allows them to shaft you royally that you have agreed to by mearly looking at the software. I doubt they would have had the roll out if they potentially thought that however may milion users world wide could potentially sue them.

But there again they may have thought themselves to big and untouchable...

Isn't that what the Volkswagon board probably thought :giggle: :giggle:
User avatar
John Ranes II, CPF, GCF
Posts: 261
Joined: Tue 24 Feb, 2004 4:36 pm
Location: Home of Harry Houdini, Edna Ferber...
Organisation: The Frame Workshop of Appleton, Inc.
Interests: Philately, Darts, Beer Making, Photography, Golf
Location: Appleton, Wisconsin, USA
Contact:

Re: Who the Hell do Mircrosoft think they are

Post by John Ranes II, CPF, GCF »

Steve N wrote: ...Might try sending Microsoft an invoice for loss of production time of 3 hours :giggle: :giggle:
Steve,

Let us know how that goes for you! :lol: :clap:

Seven of the Eight PC's in our shop run on Windows XP...so we get the annoying "No Support" message is all...

...but one has Windows 7 on it, and that is a concern. Thanks John for the advice about GWX Control Panel which I will explore. Any issues of it conflicting with any other apps?

Timely information, as we just received a warning Email from our POS software company, SpecialtySoft - FramePro about issues of compatibility problems with Windows 10.

John
John Ranes II, CPF, GCF
The Frame Workshop of Appleton, Inc.
430 E Northland Ave
Appleton, WI 54911-2127 USA

Member: FATG & PPFA
The Frame Workshop
John Ranes Picture Framer Blog
User avatar
JohnMcafee
Posts: 1145
Joined: Sun 10 Oct, 2010 9:58 am
Location: Belfast
Organisation: Scenes
Interests: Picture Framing
Putting the world to rights
Location: Belfast
Contact:

Re: Who the Hell do Mircrosoft think they are

Post by JohnMcafee »

John:

Been running GWX control panel on a couple of “mission critical” Windows 8 machines for four or five months now and have not noticed any issues, so far. However, as with all Windows applications, you never know when something unexpected is going to creep up and bite you on the bum.

BTW - if ever you feel the need to upgrade your software and also run it on any windows PC (Win98 to Win10), just let me know. :winky:
"A little learning is a dangerous thing"

(Also known as John, the current forum administrator)
User avatar
John Ranes II, CPF, GCF
Posts: 261
Joined: Tue 24 Feb, 2004 4:36 pm
Location: Home of Harry Houdini, Edna Ferber...
Organisation: The Frame Workshop of Appleton, Inc.
Interests: Philately, Darts, Beer Making, Photography, Golf
Location: Appleton, Wisconsin, USA
Contact:

Re: Who the Hell do Mircrosoft think they are

Post by John Ranes II, CPF, GCF »

JohnMcafee wrote: ...BTW - if ever you feel the need to upgrade your software and also run it on any windows PC (Win98 to Win10), just let me know. :winky:
Now, I believe that you are making reference to POS software...sadly, unless you subscribe to the U.S. moulding vendors for automatic price updates, this would be a difficult switch. :wink: :clap:

John
John Ranes II, CPF, GCF
The Frame Workshop of Appleton, Inc.
430 E Northland Ave
Appleton, WI 54911-2127 USA

Member: FATG & PPFA
The Frame Workshop
John Ranes Picture Framer Blog
User avatar
JohnMcafee
Posts: 1145
Joined: Sun 10 Oct, 2010 9:58 am
Location: Belfast
Organisation: Scenes
Interests: Picture Framing
Putting the world to rights
Location: Belfast
Contact:

Re: Who the Hell do Mircrosoft think they are

Post by JohnMcafee »

Not a problem, John.
We currently supply moulding vendors' tables for UK, Australia, South Africa, USA, and also several eurozone suppliers, and can add other countries and vendors as required. Vendors (regardless of country) can arrange to automatically update their tables on our system daily, notifying their customers of changes in stock availability, prices, etc.(EstLite feature since 2001)
"A little learning is a dangerous thing"

(Also known as John, the current forum administrator)
User avatar
prospero
Posts: 11492
Joined: Tue 05 Jun, 2007 4:16 pm
Location: Lincolnshire

Re: Who the Hell do Mircrosoft think they are

Post by prospero »

This may seem daft, but you can run a PC without the internet.

Or can you not? :?

I had my old PC re-formatted and installed XP. I used to strike it up now and then
and got an endless stream of "cannot connect to the internet" messages.
I didn't want it to connect to the internet. It's my PC and I'll do what I ############ing like with it. :evil: :P :lol:
Watch Out. There's A Humphrey About
User avatar
JohnMcafee
Posts: 1145
Joined: Sun 10 Oct, 2010 9:58 am
Location: Belfast
Organisation: Scenes
Interests: Picture Framing
Putting the world to rights
Location: Belfast
Contact:

Re: Who the Hell do Mircrosoft think they are

Post by JohnMcafee »

We have a computer no network connections, its sole purpose is to drive the CMC.
The job it does is too important to risk the potential malware threat.
"A little learning is a dangerous thing"

(Also known as John, the current forum administrator)
Graysalchemy

Re: Who the Hell do Mircrosoft think they are

Post by Graysalchemy »

My cmc is ghe same it's not connected to any network or the internet.
User avatar
Tudor Rose
Posts: 1117
Joined: Wed 10 Mar, 2010 4:07 pm
Location: Dawlish, South Devon
Organisation: The Framing Lot
Interests: Tudor history, swimming, walking and needlework.
Contact:

Re: Who the Hell do Mircrosoft think they are

Post by Tudor Rose »

Sounds like a lot of people have been caught out the same way.

http://www.bbc.co.uk/news/technology-36367221
Jo Palmer GCF(APF) Adv
Textile, Mount Design & Function & Conservation


Forum Moderator & Framing Educator
www.pictureframingtraining.com
Guild Certified Examiner & Guild Accredited Trainer
Guild Master from May 2019 to May 2022
User avatar
JohnMcafee
Posts: 1145
Joined: Sun 10 Oct, 2010 9:58 am
Location: Belfast
Organisation: Scenes
Interests: Picture Framing
Putting the world to rights
Location: Belfast
Contact:

Re: Who the Hell do Mircrosoft think they are

Post by JohnMcafee »

Woman wins $10,000 judgement against Microsoft for forced Windows 10 upgrade
Click to read

Reminder:
There is just over a month to go until Microsoft officially stops offering free upgrades to Windows 10.
"A little learning is a dangerous thing"

(Also known as John, the current forum administrator)
Post Reply