You could make one hell of a frame with this!

For topics that fall into the 'None Of The Above' category
Post Reply
fusionframer
Posts: 600
Joined: Thu 02 Sep, 2010 8:16 pm
Location: Badminton
Organisation: Fusion Picture Framing
Interests: framing
Location: Badminton

You could make one hell of a frame with this!

Post by fusionframer »

20180627_162355.jpg
20180627_162355.jpg (3.87 MiB) Viewed 4523 times
This is a bit of sepele. It started life as 5.4 metres, 10 inches wide a 3 inches deep. I wouldn't fancy hanging it though, it weighs a ton.

I should get some decent offcuts, so may try to make some profiles.

I wish i had chosen a cooler day to bw lugging these around though.

Nick
www.fusionframing.co.uk

Never trust a dog with orange eyebrows.
User avatar
prospero
Posts: 11492
Joined: Tue 05 Jun, 2007 4:16 pm
Location: Lincolnshire

Re: You could make one hell of a frame with this!

Post by prospero »

That's a rare beast. :D

In my shed I have a 12ft x1ft x2" thick plank of hardwood of the mahogany ilk. I rescued it from being turned into
firewood. Trouble is, I would hate to actually cut it up. :cry:
Watch Out. There's A Humphrey About
Not your average framer
Posts: 11013
Joined: Sat 25 Mar, 2006 8:40 pm
Location: Devon, U.K.
Organisation: The Dartmoor Gallery
Interests: Lost causes, saving and restoring old things, learning something every day
Location: Glorious Devon

Re: You could make one hell of a frame with this!

Post by Not your average framer »

I must admit that it's very tempting, the trouble is that there's so many things you could do with that, you could agonise over it for years.
Mark Lacey

“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
fusionframer
Posts: 600
Joined: Thu 02 Sep, 2010 8:16 pm
Location: Badminton
Organisation: Fusion Picture Framing
Interests: framing
Location: Badminton

Re: You could make one hell of a frame with this!

Post by fusionframer »

Part of this is now a couple of new door sills, the remainder will be a window, but i will be able to make plenty of mouldings.

It makes you think that if you had the time, you could make a load of mouldings from the size it started, and the cost was £130 for that bit. Problem is, when you would ever get the time to do it. Also, after running through my saw and planer, i was the colour of wood.

My local timber yard have ash, tulipwood, walnut oak along with about another 20 hardwoods, so if i do ever get a quiet spell, may well be worth experimenting.

Nick
www.fusionframing.co.uk

Never trust a dog with orange eyebrows.
User avatar
prospero
Posts: 11492
Joined: Tue 05 Jun, 2007 4:16 pm
Location: Lincolnshire

Re: You could make one hell of a frame with this!

Post by prospero »

I have leaning against my shed some old boards that came out of the big old house next door. They must be 200 years old - maybe more.
They've been out in the wind and weather for nigh-on 20 years and were fairly manky to start with. But they have really appealing look.
Riddled with worm holes and rotten bits. The edges are very ragged and there are things growing on them.
As it happens I got a job in last week that a frame like that would go well with. If the dry spell keeps up that will dry them out a bit and then
I'm going to see if I can stabilise the wood enough so they won't crumble away.

Stay tuned for further developments. :lol:
Watch Out. There's A Humphrey About
Post Reply