Linen Mat

Share your CMC experiences.
Or seek help and advice
Post Reply
User avatar
Dan
Posts: 41
Joined: Wed 04 Mar, 2009 6:04 pm
Location: Cody, Wyoming USA
Organisation: Cody
Interests: Photography, Just opened up a new shop by Yellowstone National Park
Location: Cody, Wyoming USA
Contact:

Linen Mat

Post by Dan »

Hi,

I am getting ready to cut my first linen mat on my Valiani. Is there anything I shoule be worried about. Cut front side up or down.

Thanks

Dan
User avatar
Dan
Posts: 41
Joined: Wed 04 Mar, 2009 6:04 pm
Location: Cody, Wyoming USA
Organisation: Cody
Interests: Photography, Just opened up a new shop by Yellowstone National Park
Location: Cody, Wyoming USA
Contact:

Re: Linen Mat

Post by Dan »

Well I took a small area I did not need and practiced on it and cut it with no problem. Set a little thicker and dropped the blade a bit and went through like butter.

Thanks anyway

Dan
from across the pond
hope you are not getting all the snow we have been missing........
McKenzie
Posts: 1
Joined: Sun 14 Aug, 2022 7:54 pm
Location: Australia
Organisation: Elan Linen
Interests: Homewares

Re: Linen Mat

Post by McKenzie »

Hi,

I am from Australia and is it so just make sure you don't drop the spring with that all you should be able to move the blade slide quite freely so all we need to do is just apply a little bit of lubricant on on a bit of mat board or something scrape it off with a blade.

Wondering how would it be to cut linen bedding so I am purchasing one for the experiment.
Post Reply