Valiani mat pro 120, dimensions without feet.

Get help and framing advice from the framing community
Post Reply
andtheframer
Posts: 3
Joined: Tue 17 May, 2016 7:55 am
Location: Cambridge
Organisation: The Lawson Gallery
Interests: Art

Valiani mat pro 120, dimensions without feet.

Post by andtheframer »

Hi.
After years of hassling my boss to up grade the mount cutter, they have finally agreed.

One small problem. Can i get the mat pro down a flight of stairs and round a corner?

All i can find spec wise is the overall size including feet.

If any has one and has a mo, could they please measure the overall board size not including feet.

Cheers

Andy
User avatar
Merlin
Posts: 1538
Joined: Thu 05 Jun, 2003 5:50 pm
Location: Cornwall
Organisation: Merlin Mounts
Interests: Aviation

Re: Valiani mat pro 120, dimensions without feet.

Post by Merlin »

The bed size without the stand is:
Length (L to R) is 1600. Height (B to top) is 1150. Depth is around 300mm.
Place the Y arm into the middle of the bed and lock it in position. Tuck the two large cables inderneath the Y arm and tape into position.
Be VERY CAREFUL of the cables and air lines at the top of the table. Lots of snagging hazards

Hope that helps
John GCF
andtheframer
Posts: 3
Joined: Tue 17 May, 2016 7:55 am
Location: Cambridge
Organisation: The Lawson Gallery
Interests: Art

Re: Valiani mat pro 120, dimensions without feet.

Post by andtheframer »

Thanks Merlin
Post Reply