MatPro CMC problem

Get help and framing advice from the framing community
Post Reply
eroomas
Posts: 9
Joined: Wed 18 Jan, 2017 8:12 pm
Location: Springfiled,IL
Organisation: Prairie House Custom Frames
Interests: I own a small Frame Shop in Springfield IL and at times would like to exchange Ideas ask and give advic to other picture framers around the globe.

MatPro CMC problem

Post by eroomas »

Hoping to get some advise from someone familiar with this machine. I just tried cutting an 8ply mat using the "single shape with outside cut" feature. Each cut the machine would cut the correct lenth lift up the blade travel an additional .5" pivot and continue. This would in addition to not completing my corners would add .5" to each the X and Y dimensions :head: Can anyone tell me what could cause his? Ive used this feature before with out a problem. Thanks in advance
User avatar
Merlin
Posts: 1538
Joined: Thu 05 Jun, 2003 5:50 pm
Location: Cornwall
Organisation: Merlin Mounts
Interests: Aviation

Re: MatPro CMC problem

Post by Merlin »

Not enough information given to give an answer.
What software are you using. What head are you using. What thickness mountboard are you using.
Has this just appeared

Check the FB Valiani Mat Pro CMC pages

https://www.facebook.com/groups/121377208461439/
John GCF
eroomas
Posts: 9
Joined: Wed 18 Jan, 2017 8:12 pm
Location: Springfiled,IL
Organisation: Prairie House Custom Frames
Interests: I own a small Frame Shop in Springfield IL and at times would like to exchange Ideas ask and give advic to other picture framers around the globe.

Re: MatPro CMC problem

Post by eroomas »

The Software is Future mat designer. The mat board is an 8ply rag. the head I dont know , I bought the machine used, its a CMC 150.
eroomas
Posts: 9
Joined: Wed 18 Jan, 2017 8:12 pm
Location: Springfiled,IL
Organisation: Prairie House Custom Frames
Interests: I own a small Frame Shop in Springfield IL and at times would like to exchange Ideas ask and give advic to other picture framers around the globe.

Re: MatPro CMC problem

Post by eroomas »

Will this help?
Attachments
20171017_193913_37732602162_o.jpg
20171017_193913_37732602162_o.jpg (5.73 MiB) Viewed 4093 times
20171017_193902_37732588602_o.jpg
20171017_193902_37732588602_o.jpg (3.89 MiB) Viewed 4093 times
eroomas
Posts: 9
Joined: Wed 18 Jan, 2017 8:12 pm
Location: Springfiled,IL
Organisation: Prairie House Custom Frames
Interests: I own a small Frame Shop in Springfield IL and at times would like to exchange Ideas ask and give advic to other picture framers around the globe.

Re: MatPro CMC problem

Post by eroomas »

screen shot
Attachments
20171017_193913_37732602162_o.jpg
20171017_193913_37732602162_o.jpg (5.73 MiB) Viewed 4093 times
Post Reply