Can anyone tell me if it's possible to disable the rebate clamps on the Cassese Mach 4 as we need to pin some mouldings without leaving a mark on them. Have thought about putting the metal spacer guide in front of the moulding but don't want to damage the teeth on the clamps.
There is nothing obvious in the user manual and I can't find a support forum specific for Cassese. Thanks in advance for any guidance.
CASSESE MACH 4 - DISABLE CLAMPS?
-
- Posts: 80
- Joined: Tue 09 Nov, 2004 1:27 pm
- Location: Cirencester
- Organisation: Creative Picture Framing
- Interests: Art
- Location: Cirencester
- Contact:
CASSESE MACH 4 - DISABLE CLAMPS?
Edward Coxwell-Rogers
Re: CASSESE MACH 4 - DISABLE CLAMPS?
Don't know the machine, but you could try putting strips of mountboard between to act as the cushion.
Watch Out. There's A Humphrey About
-
- Posts: 101
- Joined: Sat 22 Mar, 2008 9:27 am
- Location: Middleton
- Organisation: Framing shop & Gallery
- Interests: Sport, framing
- Location: Middleton
Re: CASSESE MACH 4 - DISABLE CLAMPS?
We usually just make a chevron out of a piece of flat planed timber and put that in front. That does the trick.
Roger
- Steve N
- Posts: 2992
- Joined: Sat 21 Jul, 2007 2:32 pm
- Location: Somewhere Staple Hill Bristol
- Organisation: Frontier Picture Frames ltd
- Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
- Location: Now in Bristol
- Contact:
Re: CASSESE MACH 4 - DISABLE CLAMPS?
When we join slips and spacers, we have a few bits of oak moundling (simons oak/0007) faced with mountcard which we place between the clamps and the spacers/slips, the mountcard side against the slip/spacer works a treat. We use oak so that the clamps don't destroy these bits of sacrificial bits of woods within 2 mins , and the mountcard soften the oak against the slip/spacers, so will not leave any marks
Steve CEO GCF (020)
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/