Fletcher 2200 squaring arm replacement screw dimensions

bang · Post by **bang** » Wed 23 Dec, 2020 4:30 pm

Hi!

I'm looking for a replacement button head cap screw to secure the squaring arm assembly into the base of a Fletcher 2200 mount cutter. It's the screw that goes into the angle brace and screws into the square nut inset into the side of the base. Do any of you know the correct dimensions of the screw I should be looking for?

I know it's part number 12-056, I've messaged Fletcher but didn't get a reply. I've also tried several combinations of screws and bolts from the b and q pick and mix, but no luck.

Thanks!

Not your average framer · Wed 23 Dec, 2020 5:26 pm

Being made in the USA, it is almost certainly a UNF, or a UNC thread. Probably not easily obtainable in the UK, but it might be worth having a word with Peter at framers equipment, as he just might have one in amounst his bits and pieces. ?He is a real good guy for finding stuff like this.

GeoffLittle · Post by **GeoffLittle** » Wed 23 Dec, 2020 5:28 pm

Looks like Lion have it in stock

https://www.lionpic.co.uk/p/40676/Screw

Hope that helps. Merry Christmas.

bang · Post by **bang** » Wed 23 Dec, 2020 5:51 pm

Brilliant! Thank you for your help!!!

Merry Christmas to you too.

The Framers Forum

Fletcher 2200 squaring arm replacement screw dimensions

Fletcher 2200 squaring arm replacement screw dimensions

Re: Fletcher 2200 squaring arm replacement screw dimensions

Re: Fletcher 2200 squaring arm replacement screw dimensions

Re: Fletcher 2200 squaring arm replacement screw dimensions