Glass cutting

Get help and framing advice from the framing community
Post Reply
snipeh6
Posts: 3
Joined: Wed 25 Apr, 2012 8:32 pm
Location: scotland
Organisation: aberdeen
Interests: art, sailing, books

Glass cutting

Post by snipeh6 »

Hello , I’m a framer in Aberdeen. I’d really appreciate your advice . I have the Keencut System 4000 glass cutter, unfortunately both Lion and DJ Simons have stopped selling the cutting wheel in the white holder. I have tried contacting Keencut and fletcher and framing suppliers but no real help so far. I still have a few old holders with the spindle. I’d so appreciate any advice . Thanks
User avatar
epicartstory
Posts: 3
Joined: Thu 21 Oct, 2021 2:54 pm
Location: Twickenham
Organisation: Epic Art Story Ltd
Interests: Fine art printing and framing

Re: Glass cutting

Post by epicartstory »

Hi snipeh6,
Have you tried to look at Framers Equipment?

https://www.framersequipment.co.uk/keen ... cutter.htm

I'm not sure if this is the right cutting wheel you are looking for, but it seems to be the code ZZ47CA50 at the Framers Equipment website.

I hope it helps
Best wishes
Paul
Jag62
Posts: 117
Joined: Thu 07 May, 2020 2:17 pm
Location: Dan Saff
Organisation: ---
Interests: Biscuits

Re: Glass cutting

Post by Jag62 »

Hi,

See this thread...

viewtopic.php?f=7&t=19131&p=142988&hili ... 18#p142988

The thread advises wheel available here...

https://www.glassparts.co.uk/plastic-wh ... white-wire

Regards,

Neil
snipeh6
Posts: 3
Joined: Wed 25 Apr, 2012 8:32 pm
Location: scotland
Organisation: aberdeen
Interests: art, sailing, books

Re: Glass cutting

Post by snipeh6 »

Hi Paul and Neil, thanks so much for your advice. I’ve followed up your suggestions and await their replies.
Regards karen
Post Reply