Cassese mitre saw movement issues

Get help and framing advice from the framing community
Post Reply
framing150
Posts: 3
Joined: Wed 19 Jan, 2022 1:19 pm
Location: London
Organisation: Forest
Interests: Framing, painting

Cassese mitre saw movement issues

Post by framing150 »

Haven't had a service in a year or so, and there are some points of pressured air leakage that you can hear hissing away, but in the meantime before calling out a mechanic does anyone know what to suggest when the saw blades' speed in movement is all over the show? Sometimes you start up and a blade will come across in rapid speed, and the next it'll be jumpy and then slower and more controlled...and then it can just stay at the end of its cutting range and we have to fiddle around turning off and on and pressing the valve manually to get it to go back

video link here:
vintage frames
Posts: 1349
Joined: Tue 12 Jun, 2012 6:05 pm
Location: West Wales
Organisation: https://www.dermotmcardle.co.uk/
Interests: Making picture frames
Contact:

Re: Cassese mitre saw movement issues

Post by vintage frames »

The air leak is causing that irregular movement.
See if you can locate the leak. It might just be a loose connector that needs pushed back in a bit.
Affordable Gilding Course for Professional Framers-https://www.dermotmcardle.co.uk/
https://www.instagram.com/dermotmcardle/
Post Reply