framed football shirt with glazing front and rear

Get help and framing advice from the framing community
Post Reply
User avatar
DEEPJOY
Posts: 559
Joined: Mon 10 Mar, 2008 12:06 am
Location: Newcastle-under-Lyme
Organisation: inPicture Framing
Interests: Framing, Photography, Aircooled VW and time to be creative.
Contact:

framed football shirt with glazing front and rear

Post by DEEPJOY »

Hi All
Is there any information on how to build a double glazed (front and rear glazing) sports shirt frame


Thank you
Justintime
Posts: 1868
Joined: Sat 26 Sep, 2015 8:48 am
Location: West Wales
Organisation: George The Framer LLP
Interests: Gardening, design, electronic music, good food and beverages.
Contact:

Re: framed football shirt with glazing front and rear

Post by Justintime »

Alec Palmer did a demonstration at the FATG weekend, using rare earth magnets to secure a double sided frame.
Technically not difficult and looked and worked really well imo.
Essential items he used were a 10mm Forstner Bit from Axcaliber, 10mmx5mm Neodymium Magnets (part no.F645-N35-20) from FIRST4MAGNETS/MAGNET EXPERT.
The placement of the magnets needs to be exact. he used very short cut off pins in the frame to ensure accurate placement of the two frames.
Justin George GCF(APF)
Insta: georgetheframer
Post Reply