im have a problem with open mitres , I think my morso need re-calibrated (im not getting a good 45angle cut, Seems to be offset). I have read a few posts about this, But still no too sure how to fix,
anyone know if there are any video clips (youtube) showing how to do this , Easier to see how to do.
Many thanks.
or anyone Stirling/glasgow Area who can do this for me .
open mitre - any video clips
-
- Posts: 125
- Joined: Thu 07 Aug, 2008 9:49 am
- Location: scotland
- Organisation: alloa
- Interests: movies
open mitre - any video clips
always look an the bright side of life...
- Jonny2morsos
- Posts: 2231
- Joined: Wed 12 Mar, 2008 10:28 pm
- Location: Lincs
- Organisation: Northborough Framing
- Interests: Fly Fishing, Photography and Real Ale.
- Location: Market Deeping
Re: open mitre - any video clips
The instructions used to be in the Lion catalogue in an article written by Pete Bingham but unfortunatley it is not in the current edition.
I have emailed Martin Harrold the MD of Lion asking if he could add it to the Info Store section of their website.
We will see what happens.
I have emailed Martin Harrold the MD of Lion asking if he could add it to the Info Store section of their website.
We will see what happens.
Re: open mitre - any video clips
Forum member framing engineer (Neil Stout) has a DVD covering morso maintenance, I am not sure if it covers what your looking for, but I would have thought it does.
- Jonny2morsos
- Posts: 2231
- Joined: Wed 12 Mar, 2008 10:28 pm
- Location: Lincs
- Organisation: Northborough Framing
- Interests: Fly Fishing, Photography and Real Ale.
- Location: Market Deeping
Re: open mitre - any video clips
Martin Harrold has just emailed me back and he is going to check their archived material and talk to Pete Bingham at their event on Sunday.
Thinking back I am sure someone has posted the instructions on here before just a matter of getting the terms correct in the search facility.
Thinking back I am sure someone has posted the instructions on here before just a matter of getting the terms correct in the search facility.
- MITREMAN
- Posts: 537
- Joined: Thu 07 Feb, 2008 8:05 pm
- Location: Norwich, Norfolk
- Organisation: Framers Equipment Ltd
- Interests: Conservation & box Framing memorabilia, Fishing, Sports, Keeping fit & healthy, Supporting Southend United, Computing, Cooking, Ale drinking (Camra Member), Eating out, films, Music and Concerts, DIY, Socialising, Walking, Holidays, Forest School, Wood Carving, Grandchildren and anything else I can fit in.
- Location: Northampton
- Contact:
Re: open mitre - any video clips
Ring me tommorrow and I will talk you thought it. Tel 07854728840
You will need a good metal streight edge and a small enginner square, your blade spanner and a alan key that fits the bottom blade. You will also need a wide moulding or square timber section about 3 inches wide
in preparatiom make sure you machine is clean and oiled and your underpinner is also clean and free of glue build-up.
It's not rocket sceince it's just following a set of basic rules that you will always need to remember.
Kind Regards
Mitreman
Jan Stanlick GCF
You will need a good metal streight edge and a small enginner square, your blade spanner and a alan key that fits the bottom blade. You will also need a wide moulding or square timber section about 3 inches wide
in preparatiom make sure you machine is clean and oiled and your underpinner is also clean and free of glue build-up.
It's not rocket sceince it's just following a set of basic rules that you will always need to remember.
Kind Regards
Mitreman
Jan Stanlick GCF
MITREMAN
Jan Stanlick GCF Picture Framing Consultant & Teacher
Working in association with Framers Equipment Ltd, Northampton http://www.framersequipment.co.uk
Jan Stanlick GCF Picture Framing Consultant & Teacher
Working in association with Framers Equipment Ltd, Northampton http://www.framersequipment.co.uk
-
- Posts: 125
- Joined: Thu 07 Aug, 2008 9:49 am
- Location: scotland
- Organisation: alloa
- Interests: movies
Re: open mitre - any video clips
Hi Jan,
that would be great, thanks , im on holday on islay this weekend , should be back tomorrow , ill give you a call then.
thanks.
that would be great, thanks , im on holday on islay this weekend , should be back tomorrow , ill give you a call then.
thanks.
always look an the bright side of life...
-
- Posts: 125
- Joined: Thu 07 Aug, 2008 9:49 am
- Location: scotland
- Organisation: alloa
- Interests: movies
Re: open mitre - any video clips
hi upon further investigation ,
I have taken a couple of photos, looks like this is my problem, I hope.
I have taken a couple of photos, looks like this is my problem, I hope.
always look an the bright side of life...
-
- Posts: 125
- Joined: Thu 07 Aug, 2008 9:49 am
- Location: scotland
- Organisation: alloa
- Interests: movies
Re: open mitre - any video clips
Massive thanks to Mitreman - Jan Stanlick , For the phone advise.
replaced blades and re calibrated . All working perfect again.
replaced blades and re calibrated . All working perfect again.
always look an the bright side of life...
- MITREMAN
- Posts: 537
- Joined: Thu 07 Feb, 2008 8:05 pm
- Location: Norwich, Norfolk
- Organisation: Framers Equipment Ltd
- Interests: Conservation & box Framing memorabilia, Fishing, Sports, Keeping fit & healthy, Supporting Southend United, Computing, Cooking, Ale drinking (Camra Member), Eating out, films, Music and Concerts, DIY, Socialising, Walking, Holidays, Forest School, Wood Carving, Grandchildren and anything else I can fit in.
- Location: Northampton
- Contact:
Re: open mitre - any video clips
Hi Upload,
Glad I could get you sorted and back in production.
Anyone wanting to learn more why not get some professional training
Book on one of my framing courses at Framers Equipment Ltd in Northampton
Framing Courses for all levels "It's not Rocket science"
http://www.framersequipment.co.uk/training_framing.htm
Training Dates and Courses
Basic Framing Course available ... 11th Jun ... 24th Sep
Intermediate Framing Course (box framing) ... 19th Nov
Intermediate Framing Course (textile arts, oils & prints on canvas)...30th Apr
Advanced Framing Course (mount decoration, conservation / museum mounting and framing) ... 9th Jul
Free Hot Press Training available ... 17th May ... 22nd Aug ... 7th Nov
Happy Framing Mitreman
Glad I could get you sorted and back in production.
Anyone wanting to learn more why not get some professional training
Book on one of my framing courses at Framers Equipment Ltd in Northampton
Framing Courses for all levels "It's not Rocket science"
http://www.framersequipment.co.uk/training_framing.htm
Training Dates and Courses
Basic Framing Course available ... 11th Jun ... 24th Sep
Intermediate Framing Course (box framing) ... 19th Nov
Intermediate Framing Course (textile arts, oils & prints on canvas)...30th Apr
Advanced Framing Course (mount decoration, conservation / museum mounting and framing) ... 9th Jul
Free Hot Press Training available ... 17th May ... 22nd Aug ... 7th Nov
Happy Framing Mitreman
MITREMAN
Jan Stanlick GCF Picture Framing Consultant & Teacher
Working in association with Framers Equipment Ltd, Northampton http://www.framersequipment.co.uk
Jan Stanlick GCF Picture Framing Consultant & Teacher
Working in association with Framers Equipment Ltd, Northampton http://www.framersequipment.co.uk