Workshop Sale - Equipment & Stock

Buying/selling equipment
Situations wanted/vacant
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
MarkR32
Posts: 92
Joined: Wed 29 Nov, 2017 12:41 pm
Location: Shepshed, Leicestershire
Organisation: G58 Framing
Interests: Rugby, Food, Family, Framing

Workshop Sale - Equipment & Stock

Post by MarkR32 »

Good Morning All,

I am very much testing the water with a view to selling the business as a whole.

Due to illness and other external factors i am taking the very difficult decision to wind down and sell of the machinery and stock. at the moment i am looking to secure buyers for items as i have to finish a few frames etc etc but:

Morso F - In fantastic condition, comes with custom made 1m left hand extension, standard 1.5m right hand measure and 3 set of blades, (One set is reversible)

Alfa Macchine Mini Graf 44 (pneumatic) - In fantastic condition again, this comes with a spare clamp mechanism, different pressure pads (Blue, Clear and Black) different v-nail heads (5mm, 7mm, 10mm and 15mm) no air leaks and very accurate.

Fletcher 3100 Wall Cutter - in great condition, cut MDF, Glass, Mountbaord, and acrylic, and has the heads for all 4.

Bambi Oil free PT50 Compressor - this is only a few month old at most and is is fantastic condition

Ultimo mountbard cart - in good condition, it holds mount board.

Gunnar F1 Hybrid (USB) Recently purchased from Sarah @ Gunnar and maintained by them only, this is an awesome bit of kit very reliable and transforms a business.

Handtools, incl, point gun, rules, pnumatic omer canvas gun etc

Plenty of Moulding stock (Mostly Lion stock), backboard and glass,

Mount

Essentially you could buy this setup and make money right away.

Im ideally looking to sell as a whole lot but am open to splitting if needs be

for this setup im looking for £12,000

Many Thanks
Mark
MakeMeFrame-ous
Posts: 13
Joined: Sun 29 Sep, 2019 5:15 pm
Location: Stevenage
Organisation: Tree of Life framing
Interests: Retro gaming and movie/pro wrestling memorabilia

Re: Workshop Sale - Equipment & Stock

Post by MakeMeFrame-ous »

Hi,

I would be interested in the Gunnar F1 hybrid. I have all the other bits but I've been looking for a computerised mount cutter for a while. If you're willing to sell.it separate then please let me know how much and where you are for collection. Thanks. Chris.
Moondoggy
Posts: 49
Joined: Mon 09 Sep, 2013 1:21 am
Location: Louth, Lincolnshire
Organisation: Picture This
Interests: Shooting, beekeeping, woodwork, carving, DIY

Re: Workshop Sale - Equipment & Stock

Post by Moondoggy »

PM sent re: underpinner and Fletcher
Canvasbay
Posts: 22
Joined: Thu 21 Jun, 2018 7:15 am
Location: Bridgend
Organisation: CanvasBay UK Ltd
Interests: Framing
Location: Bridgend
Contact:

Re: Workshop Sale - Equipment & Stock

Post by Canvasbay »

Hello how much is the gunnar, mount holder and any tab gun you may have please? Thanks
Mikey the 2nd
Posts: 66
Joined: Mon 30 Sep, 2019 2:59 pm
Location: South Wales
Organisation: New business
Interests: Work and work

Re: Workshop Sale - Equipment & Stock

Post by Mikey the 2nd »

Hi
Message sent with a view to buying everything.
Regards
Mike
MarkR32
Posts: 92
Joined: Wed 29 Nov, 2017 12:41 pm
Location: Shepshed, Leicestershire
Organisation: G58 Framing
Interests: Rugby, Food, Family, Framing

Re: Workshop Sale - Equipment & Stock

Post by MarkR32 »

Hi All,

Sorry for the late reply, i will be responding to the messages this evening

Thanks
Mark
Bokke2019
Posts: 4
Joined: Sat 16 Nov, 2019 12:25 pm
Location: Tyne & Wear
Organisation: Buckley & Brough
Interests: Photography, Woodworking and picture framing.

Re: Workshop Sale - Equipment & Stock

Post by Bokke2019 »

Hi just wanted to see what you are asking for the underpinned please.
can get me on 07392295533.
Thanks Steve.
theframer
Posts: 374
Joined: Wed 25 Feb, 2009 7:56 pm
Location: borehamwood
Organisation: Icon Framers Ltd
Interests: football,fishing

Re: Workshop Sale - Equipment & Stock

Post by theframer »

I am interested in the compressor please
Thanks
Dave
MarkR32
Posts: 92
Joined: Wed 29 Nov, 2017 12:41 pm
Location: Shepshed, Leicestershire
Organisation: G58 Framing
Interests: Rugby, Food, Family, Framing

Re: Workshop Sale - Equipment & Stock

Post by MarkR32 »

Hi All,

Sorry for the lack of updates due to other issues.

I have broken down the price per item below, all items will be sold on a first come first served basis, sorry for this but i can hold items for an indefinite amount of time.

Gunnar F1 Hybrid M, as above this was purchased from Gunnar UK a few months ago, comes with spare blades and such along with the USB stick that holds the vital setup codes etc. The machine has the lower table top legs that puts it on a slight angle. It can be wall mounted but is not advisable.

£9,500, offers around this will be considered

Alfa Macchine Mini Graf 44, comes with the side wings to support mouldings along with 5mm, 7mm, 10mm % 15mm v-nail blocks, will come with some vnails as well. it aso comes with the interchangable heads and pressure pads

£1,500, offers around this will be considered

Fletcher Wall Mount Cutter 3100 - in good condition, comes with the interchangable heads for MDF, Mountboard, Glass and Acrylic

£1000,00, offers around this will be considered

Bambi Oil Free PT50D Compressor, this is a maximum of 3 months old and i excellent condition, this is a must in a workshop as conventional compressors are too loud for daily working. the compressor comes with the optional wheel kit as well.

£700.00, offers around this will be considered

Morso F, in great condition, comes with custom built 1 metre long left hand extension and the standard 1.5m left hand with gauge, this also has the benefit of the second stop as well. will come with 3 sets of blades, one set is reversible

£500.00, offers around this will be considered

Stock and sundries including mount board and mouldings. Various colours of mount board in full sheets mostly colourmount, mouldings are mostly Lion moulding in full lengths

Ultimo Mountboard cart - Big red cart

£100.00

£250.00


All items will be available from 9th December 2019, if not before
MarkR32
Posts: 92
Joined: Wed 29 Nov, 2017 12:41 pm
Location: Shepshed, Leicestershire
Organisation: G58 Framing
Interests: Rugby, Food, Family, Framing

Re: Workshop Sale - Equipment & Stock

Post by MarkR32 »

Open to offers :D
MarkR32
Posts: 92
Joined: Wed 29 Nov, 2017 12:41 pm
Location: Shepshed, Leicestershire
Organisation: G58 Framing
Interests: Rugby, Food, Family, Framing

Re: Workshop Sale - Equipment & Stock

Post by MarkR32 »

All PMs replied to, I think .... :D
MarkR32
Posts: 92
Joined: Wed 29 Nov, 2017 12:41 pm
Location: Shepshed, Leicestershire
Organisation: G58 Framing
Interests: Rugby, Food, Family, Framing

Re: Workshop Sale - Equipment & Stock

Post by MarkR32 »

Items are still available with exception of

Morso and stock
MarkR32
Posts: 92
Joined: Wed 29 Nov, 2017 12:41 pm
Location: Shepshed, Leicestershire
Organisation: G58 Framing
Interests: Rugby, Food, Family, Framing

Re: Workshop Sale - Equipment & Stock

Post by MarkR32 »

Pictures attached
Attachments
Wall cutter.jpg
Underpinner.jpg
F1.jpg
Compressor.jpg
Cart.jpg
Artsypaul
Posts: 19
Joined: Tue 30 Aug, 2016 5:29 pm
Location: Peterborough
Organisation: Artsylaser
Interests: Football, and all things vw

Re: Workshop Sale - Equipment & Stock

Post by Artsypaul »

Hi is the minigraf still available? Is it a 3 position Pinner?

Thanks

Paul
MarkR32
Posts: 92
Joined: Wed 29 Nov, 2017 12:41 pm
Location: Shepshed, Leicestershire
Organisation: G58 Framing
Interests: Rugby, Food, Family, Framing

Re: Workshop Sale - Equipment & Stock

Post by MarkR32 »

Hi Paul,

It is still available although we have interest in it,

No the 44 operates by fixing the two most outer vnails allowing you to fire in as many as you see fit between the two positions
MarkR32
Posts: 92
Joined: Wed 29 Nov, 2017 12:41 pm
Location: Shepshed, Leicestershire
Organisation: G58 Framing
Interests: Rugby, Food, Family, Framing

Re: Workshop Sale - Equipment & Stock

Post by MarkR32 »

Gunnar F1 Hybrid - SOLD

Morso F - SOLD

Stock - SOLD

All other times are still available
mbaister
Posts: 30
Joined: Sun 14 Jan, 2018 10:44 am
Location: Glasgow
Organisation: Martin Baister
Interests: oil painting, photography, framing

Re: Workshop Sale - Equipment & Stock

Post by mbaister »

PM sent
MarkR32
Posts: 92
Joined: Wed 29 Nov, 2017 12:41 pm
Location: Shepshed, Leicestershire
Organisation: G58 Framing
Interests: Rugby, Food, Family, Framing

Re: Workshop Sale - Equipment & Stock

Post by MarkR32 »

Bambi Comporessor - SOLD (Pending Collection)

Underpinner- SOLD (Pending Collection)

Mount Cart - SOLD (Pending Collection)


Only the Fletcher 3100 Remaining, this is in really good condition, comes with all 4 cutting heads and spare blades
Bobbyleeds
Posts: 10
Joined: Fri 06 Sep, 2019 4:27 pm
Location: Leeds
Organisation: Rnh
Interests: Artist

Re: Workshop Sale - Equipment & Stock

Post by Bobbyleeds »

Hi is the Fletcher still available if so how much
Thanks bob
MarkR32
Posts: 92
Joined: Wed 29 Nov, 2017 12:41 pm
Location: Shepshed, Leicestershire
Organisation: G58 Framing
Interests: Rugby, Food, Family, Framing

Re: Workshop Sale - Equipment & Stock

Post by MarkR32 »

Hi,

the Fletcher is still for sale

Thanks
Post Reply