Fences
-
- Posts: 3
- Joined: Tue 22 Nov, 2016 1:54 pm
- Location: Nr Yeovil
- Organisation: None
- Interests: Framing, Photography, Driftwood Art
Fences
I recently moved the angle of the fences on my Morso frame guillotine and moved them back to cut 45deg angles, however when I try to join the frame together I have gaps...how con I set up for perfect 45 deg angles to eliminate this. Any help would be appreciated.
- Steve N
- Posts: 2992
- Joined: Sat 21 Jul, 2007 2:32 pm
- Location: Somewhere Staple Hill Bristol
- Organisation: Frontier Picture Frames ltd
- Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
- Location: Now in Bristol
- Contact:
Re: Fences
Welcome to the forum John, try this thread http://theframersforum.com/viewtopic.ph ... 0&p=105568
also you can use the search on the forum , such as Morso adjustment
also you can use the search on the forum , such as Morso adjustment
Steve CEO GCF (020)
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
Re: Fences
99% of all Morso problems can be resolved by searching for "Left Fence Tweak" or similar.
Watch Out. There's A Humphrey About
-
- Posts: 3
- Joined: Tue 22 Nov, 2016 1:54 pm
- Location: Nr Yeovil
- Organisation: None
- Interests: Framing, Photography, Driftwood Art
Re: Fences
Thank you to prospero and Steve N for your tips on where to look, angles have a smidgen of a gap now which I can live with.