Mountboard Quantities?
-
- Posts: 1916
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Mountboard Quantities?
Hi All,
Just wondering if someone has a quick answer to help me out!
I have 14 different sized mounts to do for an artist.
Is there a quick way that i am missing, to calculate how much mountboard I need to order??
Thanks
Justin
Just wondering if someone has a quick answer to help me out!
I have 14 different sized mounts to do for an artist.
Is there a quick way that i am missing, to calculate how much mountboard I need to order??
Thanks
Justin
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer
Re: Mountboard Quantities?
Plan it out on a piece of paper, or I sometimes use Excel. No, there's no quick solution I know of.
-
- Posts: 11008
- Joined: Sat 25 Mar, 2006 8:40 pm
- Location: Devon, U.K.
- Organisation: The Dartmoor Gallery
- Interests: Lost causes, saving and restoring old things, learning something every day
- Location: Glorious Devon
Re: Mountboard Quantities?
Not really, but generally I start with the biggest mount first and decide whether to cut the largest dimension first, or the smallest, depending on whether the left over off-cut would be large enough for one of the smaller mounts. This is not a necessarily a fool proof method, but it's better than nothing.
Mark Lacey
“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
-
- Posts: 1916
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Re: Mountboard Quantities?
It's not wanting to vastly over order, or have to wait a week for another delivery that's bothering me.
Am I crazy to think I can add all the measurements together and see how many sheets fit into it, and round it up to a pack??
Am I crazy to think I can add all the measurements together and see how many sheets fit into it, and round it up to a pack??
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer
Re: Mountboard Quantities?
I find there are mounts that you need a full sheet for, ones that you can get two from a sheet and ones that you can
get four from a sheet. For fourteen middling sizes You would probably need 7 sheets. I would order 10. One extra for
cock-up insurance and two for stock. If I didn't use them within a short while they would get absorbed as undermounts.
Just get plenty. It's cheaper than spending time on maths puzzles.
get four from a sheet. For fourteen middling sizes You would probably need 7 sheets. I would order 10. One extra for
cock-up insurance and two for stock. If I didn't use them within a short while they would get absorbed as undermounts.
Just get plenty. It's cheaper than spending time on maths puzzles.
Watch Out. There's A Humphrey About
- Keith Hewitt
- Posts: 1277
- Joined: Mon 28 Jun, 2004 9:49 am
- Location: BOLLINGTON - Macclesfield England
- Organisation: www.keithhewitt.co.uk
- Interests: Badminton, golf, gym, and exploring new places.
- Contact:
Re: Mountboard Quantities?
Forget the maths !
Just buy a pack of MUNKEN DUO MOUNT BOARD
Being two sided, It gives you a choice of 2 most popular colors
You can use it for the front mount(s), artwork support, and even the backing board on smaller pictures.
https://www.lionpic.co.uk/r/26052/Munke ... Mountboard
The only decision then is which caliper to choose.
1.4mm, 1.7mm, or 2.00 mm
Like many framers on the continent MUNKEN will become your default board.
( FINLAND – We use MUNKEN as our option one. Nystrom Group)
Just buy a pack of MUNKEN DUO MOUNT BOARD
Being two sided, It gives you a choice of 2 most popular colors
You can use it for the front mount(s), artwork support, and even the backing board on smaller pictures.
https://www.lionpic.co.uk/r/26052/Munke ... Mountboard
The only decision then is which caliper to choose.
1.4mm, 1.7mm, or 2.00 mm
Like many framers on the continent MUNKEN will become your default board.
( FINLAND – We use MUNKEN as our option one. Nystrom Group)
Keith Hewitt
I have visited distributors and framers in 90 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
I have visited distributors and framers in 90 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
Re: Mountboard Quantities?
Yes that would be crazy! You would then need to add on 50% for wastage. At which point you might as well assume that you're going to get two per sheet and just order a box of 10. I do spend quite a bit of time planning cutting more expensive glass and mountboard. And indeed moulding - particularly if I've veneered the moulding first. Under such circumstances it's far cheaper to plan it out than just to hack away indiscriminately. My waste bin is often full of bits of moulding that are only an inch or two long.Justintime wrote:Am I crazy to think I can add all the measurements together and see how many sheets fit into it, and round it up to a pack??
Some tips:
Are there any smaller mounts that can be cut out of the fallouts from the biggest ones?
If you have a piece of mountboard that is 5x5, how many mounts that are 3x2 can you cut out of it? The answer is four. See if you can work out how.
But if you're not going to sit down and plan it out then I'd do exactly as NYAF says. Cut the largest mount first, in such a way that the remaining bit of mountboard is a useful shape. Think carefully about which cut to make first, and in which direction. Then look at the remaining bit and see what you can do with it to use up at least, say, 70% of it - whether the next largest, or two of the smallest. Then move onto the next piece of board, and repeat.
-
- Posts: 268
- Joined: Thu 14 Apr, 2016 3:07 pm
- Location: Aberdeen
- Organisation: Rosie's Framers and Crafts
- Interests: Framing, mental health, martial arts
Re: Mountboard Quantities?
Munken is good stuff. Fairly cheap but good quality. Good CSR credentials too!
I'd say unless it's an awkward colour I would definitely over order, it'll get used at some point anyway.
I'd say unless it's an awkward colour I would definitely over order, it'll get used at some point anyway.
- Steve N
- Posts: 2992
- Joined: Sat 21 Jul, 2007 2:32 pm
- Location: Somewhere Staple Hill Bristol
- Organisation: Frontier Picture Frames ltd
- Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
- Location: Now in Bristol
- Contact:
Re: Mountboard Quantities?
A few years ago, I used to use some software like this one http://optimalprograms.com/cutting-optimization/
used to use it on big order for mount and glass and backing, we use to regularly supply a customer with 10's of 6 different size mount, glass and backing, and this software was great .
Since changing computers, have lost it, so have just downloaded it now
used to use it on big order for mount and glass and backing, we use to regularly supply a customer with 10's of 6 different size mount, glass and backing, and this software was great .
Since changing computers, have lost it, so have just downloaded it now
Steve CEO GCF (020)
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
-
- Posts: 1916
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Re: Mountboard Quantities?
Thanks everyone, it's great to know there is help and advice out there!!
I'll have a look at the Munken board. I've specced a nice thick Arqadia board for this job. Thicker mounts seem to be popular with artists in these parts...
Steve N, we're talking the same language!!!
Downloaded the demo and had the results within 5 minutes, looks like very minimal wastage and I've labelled each one, so I can work off the sheets as I go along.
There's nothing like a huge sense of relief at 5.00pm on a Friday!
I'll have a look at the Munken board. I've specced a nice thick Arqadia board for this job. Thicker mounts seem to be popular with artists in these parts...
Steve N, we're talking the same language!!!
Downloaded the demo and had the results within 5 minutes, looks like very minimal wastage and I've labelled each one, so I can work off the sheets as I go along.
There's nothing like a huge sense of relief at 5.00pm on a Friday!
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer
-
- Posts: 268
- Joined: Thu 14 Apr, 2016 3:07 pm
- Location: Aberdeen
- Organisation: Rosie's Framers and Crafts
- Interests: Framing, mental health, martial arts
Re: Mountboard Quantities?
Has anyone else who uses the Munken board notices specs?
The first lot I had were brilliant, but the box I've just got through seemed to have loads of black specs through it.
Still works out fairly cheap, so I've ordered another box anyway, hoping it was maybe a bad batch somewhere...
The first lot I had were brilliant, but the box I've just got through seemed to have loads of black specs through it.
Still works out fairly cheap, so I've ordered another box anyway, hoping it was maybe a bad batch somewhere...