Add an additional moulding
-
- Posts: 82
- Joined: Tue 30 Sep, 2014 9:01 pm
- Location: Eastleigh
- Organisation: We Frame It
- Interests: Professional picture framer. Triathlete
www.weframeit.biz
Add an additional moulding
Is it possible to add additional mouldings such as where they are stacked or maybe a stretcher bar and a frame. We have added the stretcher bars manually in the moulding list as stock as they were not in the moulding ID list (Wessex).
To be creative we must lose our fear of being wrong.
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Re: Add an additional moulding
EstLite has a column for Moulding Location (see screenshot below)
However, if you are referring to stacked frames, they are easily accommodated by use of the plus sign. Up to 5 mouldings can be "stacked" in order (Innermost first)
Two mouldings are stacked in the example above, Moulding 22 is the outer frame and PW1 the inner.
Hope this helps.
However, if you are referring to stacked frames, they are easily accommodated by use of the plus sign. Up to 5 mouldings can be "stacked" in order (Innermost first)
Two mouldings are stacked in the example above, Moulding 22 is the outer frame and PW1 the inner.
Hope this helps.
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
-
- Posts: 82
- Joined: Tue 30 Sep, 2014 9:01 pm
- Location: Eastleigh
- Organisation: We Frame It
- Interests: Professional picture framer. Triathlete
www.weframeit.biz
Re: Add an additional moulding
Thank you we were halfway there just didn't know about the plu s sign. We'll give it a go and post again if needs be.
To be creative we must lose our fear of being wrong.