Bad mat corner cuts with a Valiani CMC 120 help please!

Computerised Mount Cutters, Computers, other gadgetry.
Post Reply
Andreipopa
Posts: 1
Joined: Tue 06 Feb, 2024 3:49 pm
Location: Bistrita - Romania
Organisation: SC DECO FRAME SRL
Interests: Framing shop using a Valiani CMC 120

Bad mat corner cuts with a Valiani CMC 120 help please!

Post by Andreipopa »

Hello. I have a Valiani mat pro CMC 120 and it's quite old now .
Most recently after the cut the corners are not as good as you can see in the picture i have attached . Can this be fixed?
Someone told me that it might be because the cutting head roller is worn out from so many years of use.
If that is indeed the cause of the issue does anyone know where can i order one? I live in Romania.
Attachments
IMG_0495.jpg
JFeig
Posts: 1273
Joined: Thu 23 Sep, 2004 8:31 pm
Location: Detroit, Michigan USA
Organisation: minoxy, LLC
Interests: non-fiction knowledge
Contact:

Re: Bad mat corner cuts with a Valiani CMC 120 help please!

Post by JFeig »

Most mat cutters have a "settings" screen for this. It appears that the start and stop plunging of the blade need to be adjusted.
Jerome Feig CPF®
http://www.minoxy.com
Post Reply