Morso servicing
-
rhiannon framing
- Posts: 51
- Joined: Wed 08 Apr, 2009 7:00 am
- Location: Kingston upon Thames
- Organisation: Rhiannon Framing
- Interests: Framing, reading and being a mum of 3 keeps me fully occupied
Morso servicing
I need to get my Morso serviced. I am based in Kingston upon Thames - any suggestions
-
MITREMAN
- Posts: 576
- Joined: Thu 07 Feb, 2008 8:05 pm
- Location: Norwich, Norfolk
- Organisation: Framers Equipment Ltd
- Interests: Conservation & box Framing memorabilia, Fishing, Sports, Keeping fit & healthy, Supporting Southend United, Computing, Cooking, Ale drinking (Camra Member), Eating out, films, Music and Concerts, DIY, Socialising, Walking, Holidays, Forest School, Wood Carving, Grandchildren and anything else I can fit in.
- Location: Northampton
- Contact:
Re: Morso servicing
Hi Rhiannon Framing,
Ring Peter Stanlick At Framers Equipment
Tel 01604 790333
Mobile 07980660240
He will be able to help you, he can service,supplie all parts and sharpen your blades.
http://www.framersequipment.co.uk
Measure twice cut once.
Mitreman
Ring Peter Stanlick At Framers Equipment
Tel 01604 790333
Mobile 07980660240
He will be able to help you, he can service,supplie all parts and sharpen your blades.
http://www.framersequipment.co.uk
Measure twice cut once.
Mitreman
MITREMAN
Jan Stanlick GCF Picture Framing Consultant & Teacher
Working in association with Framers Equipment Ltd, Northampton http://www.framersequipment.co.uk
Jan Stanlick GCF Picture Framing Consultant & Teacher
Working in association with Framers Equipment Ltd, Northampton http://www.framersequipment.co.uk
-
gesso
- Posts: 572
- Joined: Mon 03 Dec, 2007 10:01 am
- Location: GL544DX
- Organisation: The Gilders Studio
- Interests: see above
Re: Morso servicing
Hi when you say servicing what does it need?
-
MITREMAN
- Posts: 576
- Joined: Thu 07 Feb, 2008 8:05 pm
- Location: Norwich, Norfolk
- Organisation: Framers Equipment Ltd
- Interests: Conservation & box Framing memorabilia, Fishing, Sports, Keeping fit & healthy, Supporting Southend United, Computing, Cooking, Ale drinking (Camra Member), Eating out, films, Music and Concerts, DIY, Socialising, Walking, Holidays, Forest School, Wood Carving, Grandchildren and anything else I can fit in.
- Location: Northampton
- Contact:
Re: Morso servicing
Hi Rhiannon Framing,
Keeping your machine clean, well oiled and the blades correctly fitted, sharpe and hollow ground with the correct draft on the left hand fence is important, always make a small test frame in a 3inch flat moulding after changing your blades with a postage size stamp whole, this will show up any adjustment needed in the left hand fence.
When cutting making sure you have your rebates supports are set correctly ( just kissing under the rebate not to high or to low )and the moulding is held tight and dose not rock, also if you do not use a Morso left hand support make sure that the moulding supporting bench is level with the machine.
You MITRE KNOWN that
MITREMAN
Keeping your machine clean, well oiled and the blades correctly fitted, sharpe and hollow ground with the correct draft on the left hand fence is important, always make a small test frame in a 3inch flat moulding after changing your blades with a postage size stamp whole, this will show up any adjustment needed in the left hand fence.
When cutting making sure you have your rebates supports are set correctly ( just kissing under the rebate not to high or to low )and the moulding is held tight and dose not rock, also if you do not use a Morso left hand support make sure that the moulding supporting bench is level with the machine.
You MITRE KNOWN that
MITREMAN
MITREMAN
Jan Stanlick GCF Picture Framing Consultant & Teacher
Working in association with Framers Equipment Ltd, Northampton http://www.framersequipment.co.uk
Jan Stanlick GCF Picture Framing Consultant & Teacher
Working in association with Framers Equipment Ltd, Northampton http://www.framersequipment.co.uk
-
rhiannon framing
- Posts: 51
- Joined: Wed 08 Apr, 2009 7:00 am
- Location: Kingston upon Thames
- Organisation: Rhiannon Framing
- Interests: Framing, reading and being a mum of 3 keeps me fully occupied
Re: Morso servicing
Thanks for all that. I am a new morso user and I've bought a neglected morso on ebay. I've changed the blades and given it a good clean but it is still not working well. I need someone to look at it and give it a bit of an overhaul.
-
Roboframer
Re: Morso servicing
I'd say stay where you are - nice area - my daughter went to college there and her name's Rhiannon too!rhiannon framing wrote: I am based in Kingston upon Thames - any suggestions