Hi.
A customer would like some album record sleeves mounted and framed, I wondered has anyone done these before or any thoughts on how best to mount these with conservation in mind.
Thanks Keith
Vynal Record Sleeves
Re: Vynal Record Sleeves
Half way down this thread http://theframersforum.com/viewtopic.php?f=11&t=4322 there is a CD case.
If the Album covers are the type that open like a book, the same method would work.
If the Album covers are the type that open like a book, the same method would work.
Re: Vynal Record Sleeves
Thanks Roboframer it's another option
Keith
Keith
-
- Posts: 279
- Joined: Tue 28 Jul, 2009 4:31 pm
- Location: Worcestershire
- Organisation: Framed
- Interests: Music, cycling, drinking, The Sensational Alex Harvey Band
- Contact:
Re: Vynal Record Sleeves
Try these links Keith, it's your spelling of vinyl that throw me!
http://theframersforum.com/viewtopic.ph ... ord#p37350
http://theframersforum.com/viewtopic.ph ... nyl+record
Paul
Framed in Alvechurch
http://theframersforum.com/viewtopic.ph ... ord#p37350
http://theframersforum.com/viewtopic.ph ... nyl+record
Paul
Framed in Alvechurch
Re: Vynal Record Sleeves
Thanks Paul.
I sware I speltt chekt it !!!!!
Keith
I sware I speltt chekt it !!!!!
Keith
-
- Posts: 99
- Joined: Tue 14 Apr, 2009 8:19 pm
- Location: Northampton uk
- Organisation: Abington Framers
- Interests: erm apart from framing & art, finding more power tools DIY Reading cookin & mad stuff like leather armour making & taking part in historical & other battle re-enactments etc
Re: Vynal Record Sleeves
Or reverse bevel thin foamcore with mount on top, look's wicked & no glue involved
-
- Posts: 17
- Joined: Wed 18 Nov, 2009 9:13 am
- Location: South Nutfield. Nr Redhill
- Organisation: Redhill
- Interests: Art Conservation - Music (Jazz, Blues, Rock) - Motor Racing F1 and Picture Framing!!
Re: Vynal Record Sleeves
Hi
If it`s JUST the sleeve you are framing a sink mount / floating mount could be used. Cut mount an opening slightly small, then cut 4 strips of mountboard/foamcore (Use offcuts) just less than width of boarder. Glue strips in place (PH Neutral). When dry fit sleeve into the recess you have made (not to tight). Now cut and fit your undermount in place . Sleeve is mounted unharmed without glue or tape. Oh yes take a copy of the back.
Regards Jon
If it`s JUST the sleeve you are framing a sink mount / floating mount could be used. Cut mount an opening slightly small, then cut 4 strips of mountboard/foamcore (Use offcuts) just less than width of boarder. Glue strips in place (PH Neutral). When dry fit sleeve into the recess you have made (not to tight). Now cut and fit your undermount in place . Sleeve is mounted unharmed without glue or tape. Oh yes take a copy of the back.
Regards Jon
-
- Posts: 99
- Joined: Tue 14 Apr, 2009 8:19 pm
- Location: Northampton uk
- Organisation: Abington Framers
- Interests: erm apart from framing & art, finding more power tools DIY Reading cookin & mad stuff like leather armour making & taking part in historical & other battle re-enactments etc
Re: Vynal Record Sleeves
That's wot i said just not so many word's