Moulding identity?

[lampie512]

Hi all.
A customer has given me 6 34" x 24" posters to frame and wants them to match the moulding of one they had done a few years ago.
I thought it would be easy to match up the moulding, basic black cushion,( I have found a thinner version A+T 995.04, for their other prints, 10 jobs in total), but am drawing a blank so far on the larger version.

Any ideas?


Thanks in anticipation.

Nige

[GeoSpectrum]

A photo and some dimensions would be handy.

[lampie512]

A photo and some dimensions would be handy.

It certainly would, and when I view the original post there is a photo of the moulding with a tape measure against it?

Here's the direct link to the photo if anyone's not seeing the picture in post #1

http://i59.photobucket.com/albums/g291/ ... ulding.jpg

Nige

[framemaker]

I have a moulding sample that looks bang on, typically it does not have a code number written on the back, I think it came from Simons but is not in the current catalogue.

Page 145 in the Wessex catalogue, ref D3330 looks very close.

[lampie512]

Thankyou for the pointer.
It does look close and I'll order a sample and run it past the customer.
Also B1456 is an ideal match for shape but not as wide.

Would an inch wide moulding be sufficient for a 36" x 24" poster with a back board and acrylic glazing I wonder?

Thanks again for the advice.

All the best,

Nige