New Valiani software
-
- Posts: 104
- Joined: Sat 22 Mar, 2008 9:27 am
- Location: Middleton
- Organisation: Framing shop & Gallery
- Interests: Sport, framing
- Location: Middleton
New Valiani software
I was away last week when the new Valiani software training day was on. Did any of you attend and if so are you getting to grips with it OK?
Roger
- Steve N
- Posts: 2992
- Joined: Sat 21 Jul, 2007 2:32 pm
- Location: Somewhere Staple Hill Bristol
- Organisation: Frontier Picture Frames ltd
- Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
- Location: Now in Bristol
- Contact:
Re: New Valiani software
Hi there,
I went up to Simons, very good day, my software arrived this week, at the moment I'm running both software, using the new one to cut new designs, while I use the older one for my older designs. As with all new software, it takes a while to get used to, slightly different ways of working, but I think it is a GREAT improvement on the old software
.
Ask me again in a couple of months
I went up to Simons, very good day, my software arrived this week, at the moment I'm running both software, using the new one to cut new designs, while I use the older one for my older designs. As with all new software, it takes a while to get used to, slightly different ways of working, but I think it is a GREAT improvement on the old software

Ask me again in a couple of months
Steve CEO GCF (020)
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
- Merlin
- Posts: 1540
- Joined: Thu 05 Jun, 2003 5:50 pm
- Location: Cornwall
- Organisation: Merlin Mounts
- Interests: Aviation
Re: New Valiani software
Another training is being planned for 10th October 2012.
Contact Joe @ Simons for details.
Contact Joe @ Simons for details.
John GCF
- IFGL
- Posts: 3092
- Joined: Sun 06 May, 2012 5:27 pm
- Location: Sheffield UK
- Organisation: Inframe Gallery Ltd
- Interests: Films ,music and art, my wife and kids are pretty cool too.
- Location: Sheffield
- Contact:
Re: New Valiani software
we have also been running the two side by side , but as of tomorrow FMD is being retired , I'm still just waiting on a save only dongle, will have to ring Joe on Monday.
- John Ranes II, CPF, GCF
- Posts: 261
- Joined: Tue 24 Feb, 2004 4:36 pm
- Location: Home of Harry Houdini, Edna Ferber...
- Organisation: The Frame Workshop of Appleton, Inc.
- Interests: Philately, Darts, Beer Making, Photography, Golf
- Location: Appleton, Wisconsin, USA
- Contact:
Re: New Valiani software
I've got both loaded on our Future machine, but we're still using the old software at this point.
I noted that we have some viewing issues on our monitor? What size monitor screen do you use and what resolution setting. I'm thinking that the new software appears to be optimized for an expanded wide monitor?
John
I noted that we have some viewing issues on our monitor? What size monitor screen do you use and what resolution setting. I'm thinking that the new software appears to be optimized for an expanded wide monitor?
John
John Ranes II, CPF, GCF
The Frame Workshop of Appleton, Inc.
430 E Northland Ave
Appleton, WI 54911-2127 USA
Member: FATG & PPFA
The Frame Workshop
John Ranes Picture Framer Blog
The Frame Workshop of Appleton, Inc.
430 E Northland Ave
Appleton, WI 54911-2127 USA
Member: FATG & PPFA
The Frame Workshop
John Ranes Picture Framer Blog
- Steve N
- Posts: 2992
- Joined: Sat 21 Jul, 2007 2:32 pm
- Location: Somewhere Staple Hill Bristol
- Organisation: Frontier Picture Frames ltd
- Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
- Location: Now in Bristol
- Contact:
Re: New Valiani software
I'm running both as the new software can not cut some of my designs
, but my new designs will be done for the new software.
As to screen resolution
Minimum is 1280x768
Recommended 1680x1050
mine is 1440x900 with no problems on a 19 inch monitor

As to screen resolution
Minimum is 1280x768
Recommended 1680x1050
mine is 1440x900 with no problems on a 19 inch monitor
Steve CEO GCF (020)
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
- Merlin
- Posts: 1540
- Joined: Thu 05 Jun, 2003 5:50 pm
- Location: Cornwall
- Organisation: Merlin Mounts
- Interests: Aviation
Re: New Valiani software
Running the Beta Testing software on 22" monitor
using 1920 x 1080 screen resolution.
WIN 7 64bit
On my production system with an 18" monitor
using 1280 x 960 resolution.
WIN 7 32bit
using 1920 x 1080 screen resolution.
WIN 7 64bit
On my production system with an 18" monitor
using 1280 x 960 resolution.
WIN 7 32bit
John GCF
- IFGL
- Posts: 3092
- Joined: Sun 06 May, 2012 5:27 pm
- Location: Sheffield UK
- Organisation: Inframe Gallery Ltd
- Interests: Films ,music and art, my wife and kids are pretty cool too.
- Location: Sheffield
- Contact:
Re: New Valiani software
not used fmd at all this week and not missed it one bit.
Re: New Valiani software
Have not used it yet!
Have heard about cmc-ix computerized mat cutter is the ideal mat cutting solution for the custom framer, offering the ideal combination of reliability, design flexibility, and best of all, maximum affordability
Have heard about cmc-ix computerized mat cutter is the ideal mat cutting solution for the custom framer, offering the ideal combination of reliability, design flexibility, and best of all, maximum affordability