Hanging MDF panels
-
ChrisG
- Posts: 257
- Joined: Mon 27 Jul, 2009 12:54 pm
- Location: Bishop's Waltham & Stockbridge Hampshire
- Organisation: Hampshire Framing Limited
- Interests: .
- Contact:
Hanging MDF panels
Are there any fixings available that will attached to 9mm MDF to enable it to be hung? Not particularly large but it has mosaics glued to the front so quite heavy.
-
stcstc
Re: Hanging MDF panels
couple of options
split battens glued to back
or
http://www.lionpic.co.uk/product/KEYHOL ... 815,0.aspx
or could do key hole slot with router although might be a bit thin the mdf
split battens glued to back
or
http://www.lionpic.co.uk/product/KEYHOL ... 815,0.aspx
or could do key hole slot with router although might be a bit thin the mdf
-
Kwik Picture Framing
- Posts: 621
- Joined: Tue 23 Jul, 2013 8:56 am
- Location: Bradford
- Organisation: Kwik Picture Framing
- Interests: Picture framing
Making just that little bit of difference to someone, somewhere. - Location: West Yorkshire
Re: Hanging MDF panels
Also Try these people http://getcanvasplus.co.uk/tools-and-fixings.html
-
RDframing
- Posts: 3
- Joined: Mon 28 Oct, 2013 2:58 pm
- Location: London
- Organisation: Rdframing
- Interests: Framing
Re: Hanging MDF panels
Attach a split batten sub frame using Very high bond (VHB) tape. This tape can be used to attached subs to aluminum too.