Hello Fellow Framers!
Does anyone know of an extension table that clips into the two slots at the front of Cassese underpinners CS88/89? I've seen a picture of what appears to be a black rigid plastic extension in an old manual for the machine but it's not showing on the Cassese web site. I've sent them an email to see if they have anything but in the meantime I just wondered if any of you have come across anything.
Thanks.
Cassese CS88 table extension
-
- Posts: 28
- Joined: Wed 20 Nov, 2013 4:27 pm
- Location: Seale-Hayne, Newton Abbot, Devon
- Organisation: Framed@Hannah's
- Interests: Picture framing, photography, playing piano & guitar (not at the same time!), reading, walking
Cassese CS88 table extension
"Industry without art is brutality." - John Ruskin.
- Mark Thornton
- Posts: 242
- Joined: Thu 08 Feb, 2007 4:00 pm
- Location: Yorkshire
- Organisation: Underpinner Spares
- Interests: Red wine - lots and lots of it.
- Location: Snaith, East Riding of Yorkshire
- Contact:
Re: Cassese CS88 table extension
I was told a few years ago by the head engineer at Cassese that they never made any extension tables for the Cs88/89, the prototype was designed with one in mind (hence the slots) but it was never put into production as the weight made the underpinner fall over.
Mark
Mark
https://www.underpinner-spares.co.uk Framing equipment spare parts - Easy online ordering
-
- Posts: 28
- Joined: Wed 20 Nov, 2013 4:27 pm
- Location: Seale-Hayne, Newton Abbot, Devon
- Organisation: Framed@Hannah's
- Interests: Picture framing, photography, playing piano & guitar (not at the same time!), reading, walking
Re: Cassese CS88 table extension
Thanks Mark. I contacted Cassese and they said basically the same thing. They did produce an extension for another model and that was as far as it went. Maybe make my own..........
"Industry without art is brutality." - John Ruskin.
- acleto
- Posts: 59
- Joined: Sat 11 Sep, 2010 10:55 am
- Location: Portugal
- Organisation: Home
- Interests: Photo, painting, framing
- Location: Oporto, Portugal
- Contact:
Re: Cassese CS88 table extension
Hi Hannahframer
Please take a look ...
Please take a look ...
- Attachments
-
- CS89_2.jpg (1.67 MiB) Viewed 2309 times
-
- CS89_1.jpg (139.01 KiB) Viewed 2309 times
Re: Cassese CS88 table extension
I used to always use mine next to a bench of the same height. With my 3099 I have a 4ft square bench with one corner cutout and it is also mounted on wheels so you can push it out for bigger frames.