Good afternoon.
By chance, does anyone have an available pressure pad for the old Euro 8008 to sell ? I have a customer wanting one. I would put the seller / buyer in touch with one another.
Many thanks.
Phil Sheldon.
Euro 8008 underpinner spare.
-
philipsheldon
- Posts: 278
- Joined: Fri 03 Apr, 2009 3:33 pm
- Location: Nottingham
- Organisation: Ashworth & Thompson Ltd
- Interests: JUDO / NFFC / CRICKET / REAL ALE ...oh, and Life in general.
- Location: Nottingham, England.
- Contact:
Euro 8008 underpinner spare.
Good afternoon.
By chance, does anyone have an available pressure pad for the old Euro 8008 to sell ? I have a customer wanting one. I would put the seller / buyer in touch with one another.
Many thanks.
Phil Sheldon.
There's nothing I can do if it don't get through, blame it on the Pony Express !
There's nothing I can say if it's gone a stray, blame it on the Pony Express !
There's nothing I can say if it's gone a stray, blame it on the Pony Express !
Re: Euro 8008 underpinner spare.
If the customer can get a piece of threaded rod of the right pitch, it wouldn't be rocket surgery to epoxy a bit of wood or something on the end and stick a bit of felt to it. 
Better still, a bit of cork tile.
The pressure pad on the old Euro was not one of it's better design features.
I have been using this model (same machine) for 30 years and soon found out not to let the factory-fitted pad contact any moulding. I always interpose a wood triangle covered with cork. Wrapped in cling film to keep glue building up on the face.
Better still, a bit of cork tile.The pressure pad on the old Euro was not one of it's better design features.
I have been using this model (same machine) for 30 years and soon found out not to let the factory-fitted pad contact any moulding. I always interpose a wood triangle covered with cork. Wrapped in cling film to keep glue building up on the face.Watch Out. There's A Humphrey About
-
Roboframer
Re: Euro 8008 underpinner spare.
If it's the same as the one on the 9000 I've got one spare.