The Framers Forum

A friend of mine wanted to try to frame his own stuff but he never got around to it.Now he wants to sell his equipment. Everything is as new, the morso has been used once to test cut a piece of moulding. It is about a year old but as explained never used. List as follows:
Morso F as new with right hand support, metric and imperial scale, plastic guard. Aluminium Stop.
Underpinner, foot operated, not sure of make (euro?), black, large with double supports and a large knob on the top, never used.
Frameco groovemaster, unopened boxed and unused (as new)
Frameco corner Jack unused unopened
50 D-rings small
30 panel pins
Wolfcraft mitre holder (not boxed) as new
Frameco Bench Master unopened boxed and unused (as new)
2 new rolls brown Kraft tape (38mm)
Frameco Mat cutter unopened boxed and unused (as new)
3/4 roll hanging tape 3M make
A bundle of wooden moulding 25 or 30mm width brown and dark wood (traditional frame) 1.5 m in length each (25 lengths in the bundle) still wrapped
Bent sheets of dusty Daler mountboard 60 x 90 cm 1400 micron
5 x sage
5 x light blue
5 x red
6 x backing board white 1800 micron
5 sheets 5mm foamboard (not bent)

Looking for £1200 or near offer
Can be picked up or delivered from Bishops Stortford/Harlow area
These were all bought from Frameco and as I say never used at all.
Thanks for looking
-David

Sorry should read:
26 bundles of 13 lengths of moulding = 350 lengths in total

Dear David

I contact you with regards your friend who has his framing equipment for sale , morso , underpinner ect .
I know it is over a month since you posted the message on the forum but i was wondering if it was still all for sale . ...My name is Jason @ furniture-art tell 01233 811884 . If you could let me know either way tha would be aoppreciated .

Regards

All Sold Now!!

Thanks to all those who got in touch and sorry to all those were a little too late.