Hello Framers of the world, long time reader first time poster!
I am looking for a solution to a problem with my bottom knife block, I have about 2mm clearance from the face of the blade and the block itself which is causing unsightly unclean cuts at the base of the frames I cut, but I am unable to/nervous about how I correct this problem, also I need to move the foot pedal about 20mm to the right as its rubbing on the inside of the machine.
Many thanks!
Morso problem!
-
- Posts: 35
- Joined: Tue 14 Jul, 2015 10:18 pm
- Location: galway
- Organisation: the frame shop
- Interests: music, framing
Re: Morso problem!
At the back of the morso there is a long metal bar with a bolt, you can adjust the height of the blades by twisting the bolt.
- Mark Thornton
- Posts: 242
- Joined: Thu 08 Feb, 2007 4:00 pm
- Location: Yorkshire
- Organisation: Underpinner Spares
- Interests: Red wine - lots and lots of it.
- Location: Snaith, East Riding of Yorkshire
- Contact:
Re: Morso problem!
https://www.underpinner-spares.co.uk Framing equipment spare parts - Easy online ordering
-
- Posts: 2
- Joined: Fri 23 Jun, 2017 5:56 pm
- Location: surrey
- Organisation: happy framer
- Interests: framing anything!
Re: Morso problem!
With kind thanks Mark, its greatly appreciated!