I have a valuable artwork which is signed on the back, The customer wants it in a box frame.
The artwork is round so "Invisible" corners are out, it cannot be mounted or pinned in place so anyone have any suggestions how I can fix it in place?
It is quite a bumpy artwork too!
Martin
Valuble Artwork
-
Martin H
- Posts: 1
- Joined: Tue 04 Jul, 2017 3:48 pm
- Location: 78 Newman Street London W1T 3EP
- Organisation: Bayeux Ltd
- Interests: Film processing, printing and of course framing
-
Jamesnkr
Re: Valuble Artwork
https://www.lionpic.co.uk/infostore/get ... 43b57a67b3
Or use pass-through hinges. Top tip (from my conservator) when using pass-through hinges, cut them in a piece of 400 micron card and then attach the card to mountboard.
Or use pass-through hinges. Top tip (from my conservator) when using pass-through hinges, cut them in a piece of 400 micron card and then attach the card to mountboard.