Page 1 of 1
MatPro CMC problem
Posted: Mon 16 Oct, 2017 9:43 pm
by eroomas
Hoping to get some advise from someone familiar with this machine. I just tried cutting an 8ply mat using the "single shape with outside cut" feature. Each cut the machine would cut the correct lenth lift up the blade travel an additional .5" pivot and continue. This would in addition to not completing my corners would add .5" to each the X and Y dimensions
Can anyone tell me what could cause his? Ive used this feature before with out a problem. Thanks in advance
Re: MatPro CMC problem
Posted: Tue 17 Oct, 2017 9:22 am
by Merlin
Not enough information given to give an answer.
What software are you using. What head are you using. What thickness mountboard are you using.
Has this just appeared
Check the FB Valiani Mat Pro CMC pages
https://www.facebook.com/groups/121377208461439/
Re: MatPro CMC problem
Posted: Tue 17 Oct, 2017 5:21 pm
by eroomas
The Software is Future mat designer. The mat board is an 8ply rag. the head I dont know , I bought the machine used, its a CMC 150.
Re: MatPro CMC problem
Posted: Wed 18 Oct, 2017 1:36 am
by eroomas
Will this help?
Re: MatPro CMC problem
Posted: Wed 18 Oct, 2017 1:38 am
by eroomas
screen shot