I've just bought a 2nd hand pneumatic Morso and wondered if anyone has an idea of compressor requirements, I've looked on the Internet but can't find any information ie capacity or pressure
Cheers guys
Mark
Pneumatic Morso
-
- Posts: 32
- Joined: Mon 25 Jan, 2016 4:56 pm
- Location: Sunny Lincolnshire sometimes
- Organisation: Framin
- Interests: Cars
Re: Pneumatic Morso
Mark, if you are referring to the morso EH, it doesn’t use a compressor, it’s pneumatic. Best bit of kit I ever had the fortune to stumble across.
P
P
- Mark Thornton
- Posts: 242
- Joined: Thu 08 Feb, 2007 4:00 pm
- Location: Yorkshire
- Organisation: Underpinner Spares
- Interests: Red wine - lots and lots of it.
- Location: Snaith, East Riding of Yorkshire
- Contact:
Re: Pneumatic Morso
The Morso H is pneumatic and requires a big compressor as it use's a lot of air per cycle, you could probably just get by with a 60 litre tank if you are a low volume bespoke user but if you do a serious number of frames then 120 litre (minimum) would be required.
Mark
Mark
https://www.underpinner-spares.co.uk Framing equipment spare parts - Easy online ordering
-
- Posts: 32
- Joined: Mon 25 Jan, 2016 4:56 pm
- Location: Sunny Lincolnshire sometimes
- Organisation: Framin
- Interests: Cars
Re: Pneumatic Morso
Oops sorry, got the wrong one. Seasons greetings.
P
P
-
- Posts: 98
- Joined: Sun 01 May, 2011 8:20 pm
- Location: Evesham
- Organisation: Frames
- Interests: Caricature
Re: Pneumatic Morso
Thanks Mark, that's what I wanted to know. I was hoping to get away with a 50-60 litre tank instead a 100l one