Advice on second hand valiani CMS 120

Ask for and give assistance

Advice on second hand valiani CMS 120

Postby boscawen46 » Tue Feb 12, 2019 6:21 pm

I have been offered a Valiani CMS 120 semi pneumatic mountcutter and I just need some advice please, it is in good working order and I will only be using it for fairly light runs. Does anyone out there have one of these and use it regularly and if so what are their experiences with it. I realise that it is a pretty old design and not up to the fully pneumatic ones but hope that it might be a good addition to my workshop.
I am attaching a few photos of a similar machine for reference.
Thanks James



valiani.jpg
valiani.jpg (190.75 KiB) Viewed 331 times


valiani 2.jpg
valiani 2.jpg (166.88 KiB) Viewed 331 times
Attachments
valiani badge.jpg
valiani badge.jpg (151.74 KiB) Viewed 331 times
boscawen46
 
Posts: 19
Joined: Sun Sep 04, 2011 8:35 am
Location: gillingham, dorset
Organisation: james frederick
Interests: framing,woodwork

EstLite Frame Pricing Software

Re: Advice on second hand valiani CMS 120

Postby boscawen46 » Wed Feb 13, 2019 8:55 am

Any advice or info?
Thanks
boscawen46
 
Posts: 19
Joined: Sun Sep 04, 2011 8:35 am
Location: gillingham, dorset
Organisation: james frederick
Interests: framing,woodwork

Re: Advice on second hand valiani CMS 120

Postby Steve N » Wed Feb 13, 2019 9:22 am

it's a pretty good machine, a step up from the bench top cutters, good first step into production work, pretty accurate, it works different from the benchtop cutters, is such as you set the borders on the benchtop (BT from here on) so you are mesauring from the outside of the mount to the edge of the window, so if your blank (before you cut the window) is either slightly oversize of undersize, then this will effect the size of the window, with this machine, your datum starts n the bottom left hand corner, then you set the stops (4) from that point, so you set the left hand side stop, then add on the window size to set the right hand stop, same with the height, you set the bottom stop, then add on the height of the window to set the top stop, so doesn't matter what size blank mount you put in the machine , it will cut the same size window :clap:

You cut from the front,doing a double (or even a triple mount) you set the stops as above, (for the top mount) then you have flip down spacer stops, which when they are flipped down, make the border of the mount 5mm larger (or window 10mm smaller), stick your two blanks (for a double mount ) together, only where the mount border is, then pop in the machine, cut the top mount on the original stop settings, then when the center fall out comes out of the top mount, flip all the spacer stops down, and cut the bottom mount, you will find everything lines up running true :clap:
Steve CEO GCF (020)
"Just because you seen it on the internet, does not make it true or right" -Abraham Lincoln
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
User avatar
Steve N
 
Posts: 2358
Joined: Sat Jul 21, 2007 3:32 pm
Location: Bath, Somerset
Location: Bath, in the wild wild west
Organisation: Frontier Picture Frames
Interests: Walking our retired Greyhond,art, falling asleep on sofa in front of the telly

Re: Advice on second hand valiani CMS 120

Postby boscawen46 » Thu Feb 14, 2019 12:12 am

Much appreciated,thanks.
boscawen46
 
Posts: 19
Joined: Sun Sep 04, 2011 8:35 am
Location: gillingham, dorset
Organisation: james frederick
Interests: framing,woodwork


Return to Help!



  • Advertisement

 
Picture Framer's Trade Directory
Picture Framer's Oracle

 
Members Map Header
Members Map
More info
Resources Header
Contact Forum Admin
Directory
How to include an image in your post
Cove Box Designer
Download Designer
General supplies
Glass
Machinery
Mounts/Mountboard
Artists
Conservators
Prints
Software
Tuition
UK Medals
Framers Forum Live!
Support Header
Crimson
White
Green
Violet
Advertise Header
Forum Banner Ads