Pricing software
-
- Posts: 437
- Joined: Sun 05 Mar, 2017 8:22 pm
- Location: Birchington-on-Sea, Kent
- Organisation: Birchington Framing Centre
- Interests: Guitar, woodwork, cycling Singing
- Contact:
Pricing software
I currently use the Wessex pricing software that cost quite a considerable amount but due to endless problems updating it with anything but Wessex prices I have decided to try the new subscription FrameR had a few problems that have been sorted out very quickly by the developers and I think I quite like it. Just wondered if any others use it or have tried it? What appealed instantly was the comprehensive automaticity updated suppliers prices/new mouldings etc,
I know pricing software is a bit sensitive on this forum but would like to think it can be discussed fairly and unbiasedly as I have not fully committed to any particular program yet.
Sent from my iPhone using Tapatalk
I know pricing software is a bit sensitive on this forum but would like to think it can be discussed fairly and unbiasedly as I have not fully committed to any particular program yet.
Sent from my iPhone using Tapatalk
-
- Posts: 2095
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Re: Pricing software
In my third year of Estlite. I might be looking for something more exciting soon.
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer
- GeoSpectrum
- Posts: 2171
- Joined: Fri 01 Oct, 2010 11:49 am
- Location: Lincolnshire
- Organisation: Ashcraft Framing
- Interests: Family, x-country skiing, wine, art, Jazz
- Location: Gainsborough, Lincolnshire
- Contact:
Re: Pricing software
What problems did you have with Wessex? I've used it for years without any particular problems that I can recall.
Alan Huntley
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
-
- Posts: 437
- Joined: Sun 05 Mar, 2017 8:22 pm
- Location: Birchington-on-Sea, Kent
- Organisation: Birchington Framing Centre
- Interests: Guitar, woodwork, cycling Singing
- Contact:
Re: Pricing software
When I first started I only used Wessex as a supplier the problems began when I also started using Lion who supplied the data for the WPP but the file had to be altered so the WPP would accept it and it eventually did after intervention from Lion and WPP but when the time came to update the Lion file with new prices and mouldings it will not overwrite the existing file and therefore not update the Lion part the Wessex ones are ok and the problem can not be sorted ( It has been suggested that the entire data be sent to WPP to examine the structure and sort out the conflict but I thought I would give FrameR a try first)
As stated my immediate delight with FrameR was most of the main suppliers data was there and up to date but have also began to appreciate the very different way it calculates pricing based on cost of materials, Labour/your hourly rate rather than the multiplying of material costs.
I did look at FrameR years ago in its buy yearly format and it was very expensive and did not have the Wessex data ( Wessex apparently refused to supply it) Now it’s based on a pay monthly basis and the subscription rate seems fairly structured in the more order value you take the more you pay, (a percentage of the cost of the job you price and convert to a order is taken out of your monthly subscription) So anyone wishing to trial FrameR fully for a month (unless you exceed your allowance) would be £10
Sent from my iPhone using Tapatalk
As stated my immediate delight with FrameR was most of the main suppliers data was there and up to date but have also began to appreciate the very different way it calculates pricing based on cost of materials, Labour/your hourly rate rather than the multiplying of material costs.
I did look at FrameR years ago in its buy yearly format and it was very expensive and did not have the Wessex data ( Wessex apparently refused to supply it) Now it’s based on a pay monthly basis and the subscription rate seems fairly structured in the more order value you take the more you pay, (a percentage of the cost of the job you price and convert to a order is taken out of your monthly subscription) So anyone wishing to trial FrameR fully for a month (unless you exceed your allowance) would be £10
Sent from my iPhone using Tapatalk
- Tom Chambers
- Posts: 61
- Joined: Wed 22 Aug, 2018 5:17 pm
- Location: Dalkeith
- Organisation: Framed By TC
- Interests: Photography
Re: Pricing software
As all my IT is Mac based I use iFramer, has taken a while to get used to to it, but I really like it now. Subscription based and support from them is very good. They are always looking at how they can enhance to software and so far have found it fits my needs. Also bonus is that it links direct to Xero which I use for my accounts, so saves me time in keeping track of sales and payments.
Is disappointing that other software suppliers provide window only versions, does limit competition, but iFramer being webbed does overcome that.
Just my thoughts.
Is disappointing that other software suppliers provide window only versions, does limit competition, but iFramer being webbed does overcome that.
Just my thoughts.
-
- Posts: 6
- Joined: Thu 31 Mar, 2016 7:45 pm
- Location: London
- Organisation: South London Framers
- Interests: Framing
Re: Pricing software
I used Wessex app and loved the ease of it, but also moved away as I struggled to get the CSV files to load. I’ve moved to I framer, which I’ve found (so far) great to use. We take the orders on an iPad in the shop and are slowly moving towards paperless ordering. I particularly like its email notification and link to Xero.
Like the previous comment, I picked this because it works on a Mac. But I’ve been impressed and would recommend a trial.
Like the previous comment, I picked this because it works on a Mac. But I’ve been impressed and would recommend a trial.
- GeoSpectrum
- Posts: 2171
- Joined: Fri 01 Oct, 2010 11:49 am
- Location: Lincolnshire
- Organisation: Ashcraft Framing
- Interests: Family, x-country skiing, wine, art, Jazz
- Location: Gainsborough, Lincolnshire
- Contact:
Re: Pricing software
There really needs to be a straightforwad iPhone or iPad based pricing software. A downloadable app would be great.
Alan Huntley
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
-
- Posts: 185
- Joined: Thu 28 Apr, 2011 6:09 pm
- Location: Ewshot, Hampshire
- Organisation: Kudu Frames
- Interests: Art, photography
- Contact:
Re: Pricing software
I use an MS Excel spreadsheet for all my pricing.GeoSpectrum wrote:There really needs to be a straightforwad iPhone or iPad based pricing software. A downloadable app would be great.
It is relatively basic and pricing is calculated purely on materials cost and mark up.
There is provision to add a specific amount to cover any odd item or extras and this can be used as a means of entering a labour cost.
All costing factors can be changed easily.
I have 2 versions of the file, 1 of which is simplified and can be used on the basic free excel app for mac or android.
I have this on my Samsung S7 phone and a more comprehensive version on a windows 10 pad at the workshop.
Basic file looks like Filesize is less than 300kb and this contains both Lion and LJ current moulding pricing.
I am happy to share this if you would like to have a look. Let me have an email address and I'll send it over.
-
- Posts: 673
- Joined: Mon 29 Nov, 2010 12:20 pm
- Location: Halifax, West Yorkshire
- Organisation: Abacus Picture Framing and Gallery
- Interests: Picture Framing, Furniture making.
Re: Pricing software
Do you have a link to the frameR software?
I’ve googled it unsuccessfully
I’ve googled it unsuccessfully
-
- Posts: 437
- Joined: Sun 05 Mar, 2017 8:22 pm
- Location: Birchington-on-Sea, Kent
- Organisation: Birchington Framing Centre
- Interests: Guitar, woodwork, cycling Singing
- Contact:
Re: Pricing software
That’s probably because I spelt it wrong.[emoji3]
https://www.framiac.com/
Sent from my iPhone using Tapatalk
https://www.framiac.com/
Sent from my iPhone using Tapatalk
-
- Posts: 2
- Joined: Thu 02 May, 2019 2:47 pm
- Location: LONDON
- Organisation: The Frame Factory Limited
- Interests: working!
Re: Pricing software
Hi Everyone, I'm considering moving to i-Framer pricing software and wondered if anyone using it in the South East of England might allow me to come see how it works in practice. I've had the free trial, they've comprehensively answered loads of questions for me, I'm just worried... if we get the implementation wrong, the entire workshop will fall over / mutiny / impload. It would give me so much confidence seeing how another framer uses it in practice - I have a particular interest in seeing how the cutting lists are used and the system updated to show when work is complete.
Hoping someone can oblige me!
Thanks,
Daniel
Hoping someone can oblige me!
Thanks,
Daniel
-
- Posts: 437
- Joined: Sun 05 Mar, 2017 8:22 pm
- Location: Birchington-on-Sea, Kent
- Organisation: Birchington Framing Centre
- Interests: Guitar, woodwork, cycling Singing
- Contact:
Pricing software
Have you tried FramR? it will cost you £9.99 to try it.
I am just trialling i-framer before I get too involved with FramR I will post on my personal conclusions between the two soon.
I’m beginning to think they are both by the same person who’s name is Mark [emoji3]
But as already stated I am liking FramR so far
I am just trialling i-framer before I get too involved with FramR I will post on my personal conclusions between the two soon.
I’m beginning to think they are both by the same person who’s name is Mark [emoji3]
But as already stated I am liking FramR so far
-
- Posts: 165
- Joined: Wed 26 Apr, 2017 4:33 pm
- Location: SE London
- Organisation: The Nunhead Framer
- Interests: Theatre, film, the arts, a bit of this, a bit of that
Re: Pricing software
I am in the process of trialing I-Framer. I had a look at it a while back when there wasn't much feedback on it but haven't been able to find a Mac friendly software and decided after reading this post to speak to Mark.
For what its worth, my experience so far - three days in - Mark has gone to great lengths to ensure I am finding my way around the trial software and making sure I can use it fit for my requirements. If the support so far is anything to go by I am impressed.
For what its worth, my experience so far - three days in - Mark has gone to great lengths to ensure I am finding my way around the trial software and making sure I can use it fit for my requirements. If the support so far is anything to go by I am impressed.
-
- Posts: 2095
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Re: Pricing software
There is a thread somewhere, either here or Framers Only on Facebook, where there were some complaints about Iframer that updates are far too frequent and can occur while you're in the middle of using the software, suddenly making changes to the functions and that if bugs appeared it would revert back to previous versions without warning...just passing on what I read..
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer
-
- Posts: 165
- Joined: Wed 26 Apr, 2017 4:33 pm
- Location: SE London
- Organisation: The Nunhead Framer
- Interests: Theatre, film, the arts, a bit of this, a bit of that
Re: Pricing software
Thanks for that Justin, that is a very good point to consider and frankly I am happy to raise with Mark and get his input. You would expect some outages for updates but equally expect notice of when these would scheduled and it being carried out (as best as possible) during a quieter period.
I was surprised that they didn't have R&H prices but said were happy to get it sorted.
I was surprised that they didn't have R&H prices but said were happy to get it sorted.
-
- Posts: 437
- Joined: Sun 05 Mar, 2017 8:22 pm
- Location: Birchington-on-Sea, Kent
- Organisation: Birchington Framing Centre
- Interests: Guitar, woodwork, cycling Singing
- Contact:
Re: Pricing software
I am still trialling i-framer but using Framr at the moment for running my business. one major difference is the way prices are calculated between the two as framr works on material cost + Labour + Mark up, whereas from what I can see i-framer is just multiplying material cost + mark up, please correct me if i'm wrong on that, as I have not had much time to evaluate it properly yet.
-
- Posts: 2095
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Re: Pricing software
I asked R+H when I started if they could supply a csv file of prices for software, the answer then was no! There are new owners now, maybe they'll be a bit more inclined to help.
* I have just spoken to them and it is in the pipeline, who knows when, but they are on it apparently*
* I have just spoken to them and it is in the pipeline, who knows when, but they are on it apparently*
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer
- YPF
- Posts: 463
- Joined: Mon 07 Sep, 2009 11:25 am
- Location: Worcester
- Organisation: Previously Your Picture Framer
- Interests: Now retired and about to move to Wiltshire to hone my woodturning skills and do some dog walking.
- Location: Worcester
Re: Pricing software
Ed209,
I-Framer does also include a labour charge and all pricing elements are easily adjusted to suit your own requirements.
I have been using I-Framer for over 2 years now and found the support from Mark to be first class (and this is a different Mark from FramR by Framiac). All the catalogue updates are carried out for you and, yes, there are occasional blips with connectivity and updates generally conducted to suit the Australian time zones but this has never caused a major issue for me.
One of the greatest advantages is the ability to use it anywhere on any device, you just need an internet browser.
I-Framer does also include a labour charge and all pricing elements are easily adjusted to suit your own requirements.
I have been using I-Framer for over 2 years now and found the support from Mark to be first class (and this is a different Mark from FramR by Framiac). All the catalogue updates are carried out for you and, yes, there are occasional blips with connectivity and updates generally conducted to suit the Australian time zones but this has never caused a major issue for me.
One of the greatest advantages is the ability to use it anywhere on any device, you just need an internet browser.
Steve
Chief Coffee Drinker
Chief Coffee Drinker
-
- Posts: 5
- Joined: Wed 19 Jun, 2024 7:15 am
- Location: Essex. UK
- Organisation: Guildhall Framing
- Interests: Shooting, walking
Re: Pricing software
Hi all
As a relatively new framer, I've been using FramR and for the most part, getting on ok with it. The biggest hiccup I've got with it is the invoice and quote printing. I want to use headed paper, but because of the file upload restrictions the header is illegible.
Has anyone found a way of successfully uploading a letter head or, what does everyone use as an alternative?
As a relatively new framer, I've been using FramR and for the most part, getting on ok with it. The biggest hiccup I've got with it is the invoice and quote printing. I want to use headed paper, but because of the file upload restrictions the header is illegible.
Has anyone found a way of successfully uploading a letter head or, what does everyone use as an alternative?
-
- Posts: 550
- Joined: Sun 08 Jan, 2023 10:25 pm
- Location: United Kingdom
- Organisation: Retired
- Interests: Calligraphy, gardening, framing rehabilitation
Re: Pricing software
I managed it with the original version, I don’t remember how but I should imagine the new version would do it too.
Give Mark Wilson a call, you’re paying for tech support!
Give Mark Wilson a call, you’re paying for tech support!