Selling framing equipment and moulding london
Posted: Wed 20 May, 2020 4:01 pm
I am selling following items and based in Camden, London if you still need any items and want to know more let me know.
Bambi air compressor
Used but in very good condition
BAMBI BB50D
Weight46.0000
Capacity100 Litres/min
DriveDirect
Motor1 HP (0.68 Kw)
Pressure8 Bar
Receiver50 Litres
Voltage240
Flow @ 4 Bar70 Litres/Min
Dimensions55 x 88 x 29 mm (H x W x D)
Noise Level (dBA)42 dB(A)
Compressor Details:
• This compressor has piston rings. This means oil carry over can be experienced.
• This compressor has a 50% duty cycle. This means 10 minutes on, 10 minutes off. Up to a maximum of 30 minutes on, 30 minutes off.
• Not intended for heavy duty use. Should not be used with heavy air tools.
Morso. F.45295 dk 8900randers
Used but in good condition
Cassese underpinner
Underpinner; cassese 486 ultra
Xp a.d. 371 2007.
110 v ou 220v
100w
6bars min 7 bars max
80kg
As well as loads of lengths of moulding of all sorts
Let me know if you're interested in anything
Best wishes.
Bambi air compressor
Used but in very good condition
BAMBI BB50D
Weight46.0000
Capacity100 Litres/min
DriveDirect
Motor1 HP (0.68 Kw)
Pressure8 Bar
Receiver50 Litres
Voltage240
Flow @ 4 Bar70 Litres/Min
Dimensions55 x 88 x 29 mm (H x W x D)
Noise Level (dBA)42 dB(A)
Compressor Details:
• This compressor has piston rings. This means oil carry over can be experienced.
• This compressor has a 50% duty cycle. This means 10 minutes on, 10 minutes off. Up to a maximum of 30 minutes on, 30 minutes off.
• Not intended for heavy duty use. Should not be used with heavy air tools.
Morso. F.45295 dk 8900randers
Used but in good condition
Cassese underpinner
Underpinner; cassese 486 ultra
Xp a.d. 371 2007.
110 v ou 220v
100w
6bars min 7 bars max
80kg
As well as loads of lengths of moulding of all sorts
Let me know if you're interested in anything
Best wishes.