Page 1 of 1

Items for Sale Update

Posted: Mon 10 Aug, 2020 8:53 am
by MartMan
This is an update as some items have been sold
plus I found more hotpress media
All items are collection only
Photos available on request.

1 x Manual Morso in very good condition + 3 sets of Morso blades.
Complete with of my substantial stock of moulding
£695 ono

_________________________________

Hot Press Jet Mounter JM 26
with £565 of media stock
32 white display boards 815mm x 1120mm (32" x 44")
2 boxes Drytac Twintac Mount Film 650 X 25m
i box satin matt
2 boxes course linen
1 box gloss
1 box matt
Machine in very good condition
£520 ono
_________________________________
1 Keen Cut Ultimate Gold 48”
with 24 full sheets mixed colours of acid free mountboard
Very good condition
£595 ono

_________________________________

1 x black rigid point driver
1 x green flexipoint driver
1 x yellow multipoint driver
With pins for all guns
£60 each or £150.00 for all 3


____________________________
11 x Mat Decoration Tapes
4 x Cotton Rag Clean Peel Self Adhesive Hinging Tape
1 x Conservation Tape
19 x Bevelled Foam Strips

£20
_________________________________

4 x white float frames 10” x 8”
4 x black float frames10” x 8”
2 x natural float frames 10” x 8”
1 x beech float frame 10” x 8”
1 x gold/ silver effect float frame 10”x 8”
New and sealed

All at £4 each
_________________________________
1 x black float frame
New and sealed 20” x 8”

£6
_________________________________

4 x off white float frames
New and sealed 16” x 20”

£8.00 each

Or £60 for all float Frames
_________________________________

Re: Items for Sale Update

Posted: Wed 26 Aug, 2020 5:22 am
by MartMan
1 Keen Cut Ultimate Gold 48”
with 24 full sheets mixed colours of acid free mountboard

Very good condition collection only £450

Any reasonable offer accepted

Re: Items for Sale Update

Posted: Mon 31 Aug, 2020 11:19 am
by BSMTSPACE
Hi there MartMan

Is the Morso still available please?
Where are you located?

Thanks
Greg

Re: Items for Sale Update

Posted: Mon 31 Aug, 2020 11:21 am
by BSMTSPACE
Is the KeenCut still available please MartMan?