Anyone thinking of upgrading? Looking for a great condition Gunnar F1-M Hybrid.
Please PM me if you have any info/leads. Thanks
Wanted - Gunnar F1-M Hybrid CMC - Anything out there?
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
-
- Posts: 1880
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Wanted - Gunnar F1-M Hybrid CMC - Anything out there?
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer
-
- Posts: 99
- Joined: Fri 29 Dec, 2017 3:43 pm
- Location: Whitby, North Yorkshire
- Organisation: Whitby Picture Framing
- Interests: Walking when my back allows me, photography, travel, cars, gaming on the PC
Re: Wanted - Gunnar F1-M Hybrid CMC - Anything out there?
Talk to Sarah at Gunnar, she sorted me out with a re-con one.
-
- Posts: 1880
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Re: Wanted - Gunnar F1-M Hybrid CMC - Anything out there?
Thanks, we're in touch, not much out there at the moment.
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer
-
- Posts: 19
- Joined: Fri 04 Jul, 2014 11:43 am
- Location: Barton on Sea
- Organisation: Framers service
- Interests: Reading, computer software and hardware.
Customer Service
Re: Wanted - Gunnar F1-M Hybrid CMC - Anything out there?
Hi George;
I have an F1 M standard available.
It cuts the inside and outside cuts at 45degrees.
Will cut up to 4mm board though.
It is a machine which has had very little use and is in good condition.
It has been used wall mounted so has no stand.
The customer who owns it is looking for £4750.
It comes with a computer.
If you are interested give me a buzz.
David Jarvis (ex Gunnar engineer)
0773447697
Ps. I will install and train you on usage if that is what you require
I have an F1 M standard available.
It cuts the inside and outside cuts at 45degrees.
Will cut up to 4mm board though.
It is a machine which has had very little use and is in good condition.
It has been used wall mounted so has no stand.
The customer who owns it is looking for £4750.
It comes with a computer.
If you are interested give me a buzz.
David Jarvis (ex Gunnar engineer)
0773447697
Ps. I will install and train you on usage if that is what you require
-
- Posts: 19
- Joined: Fri 04 Jul, 2014 11:43 am
- Location: Barton on Sea
- Organisation: Framers service
- Interests: Reading, computer software and hardware.
Customer Service
Re: Wanted - Gunnar F1-M Hybrid CMC - Anything out there?
Sorry George
Phone number 07734476973
Phone number 07734476973
-
- Posts: 1880
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Re: Wanted - Gunnar F1-M Hybrid CMC - Anything out there?
Thanks David, looks like I have found one now, all sorted.
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer