Complete Workshop
Posted: Mon 02 Jan, 2023 3:51 pm
Bespoke Workshop
Printer – Epsom stylus pro 9890 - £1,000
Rotatrim Professional M54 paper trimmer - £200
Paper roll wall dispenser - £100
Paper roll Storage Cart - £120
Canvas stretcher - £150
Keencut oval mount and glass cutter – with accessory kit - £50
Omar narrow stapler – 4097.16 Used - £100
Omar narrow stapler – 4097.16 virtually new in box - £190
Omar wide canvas stapler 50.16 – 4-16mm – seen very little use - £150
Omar Flexi stapler – 5.3 - 15mm flexi points - £150
Computerised vacuum bed mount cutter – Tru cut Elan – with computer and stand - £3,500
Cassesse 276 underpinner with spare logic valves, hammer and main piston (pneumatic pin driver) - £450
Jun-air Compressor – 35 litre tank (ample for our workshop with hand tools/underpinner/CMC) - £350
Flat bed press 22x26 Ademco - £50
Hot press - dry tac jet mounter - 34inches with variety of laminating materials - £350
Wall mounted rolls rack - £90
Gummed craft tape 2/3/4 inch
Variety of self adhesive tapes – ph7/70 etc.
Variety of Acrylic panels for frames - £250
Alphamachine Guillotine- fillet pro trim cutter – mitre cuts slips up to 16mm wide - £150
Morso F – 48979 – manufactured 1990 excellent condition– includes 3 sets of blades and 3 spare springs - £550 SOLD
Excalibur 5000 – multi function – glass/MDF/Board cutter - £450
All equipment has been regularly calibrated and well maintained. Inspection encouraged.
Everything is priced to sell, I am not interested in haggling, unless you are making an offer for the lot
Printer – Epsom stylus pro 9890 - £1,000
Rotatrim Professional M54 paper trimmer - £200
Paper roll wall dispenser - £100
Paper roll Storage Cart - £120
Canvas stretcher - £150
Keencut oval mount and glass cutter – with accessory kit - £50
Omar narrow stapler – 4097.16 Used - £100
Omar narrow stapler – 4097.16 virtually new in box - £190
Omar wide canvas stapler 50.16 – 4-16mm – seen very little use - £150
Omar Flexi stapler – 5.3 - 15mm flexi points - £150
Computerised vacuum bed mount cutter – Tru cut Elan – with computer and stand - £3,500
Cassesse 276 underpinner with spare logic valves, hammer and main piston (pneumatic pin driver) - £450
Jun-air Compressor – 35 litre tank (ample for our workshop with hand tools/underpinner/CMC) - £350
Flat bed press 22x26 Ademco - £50
Hot press - dry tac jet mounter - 34inches with variety of laminating materials - £350
Wall mounted rolls rack - £90
Gummed craft tape 2/3/4 inch
Variety of self adhesive tapes – ph7/70 etc.
Variety of Acrylic panels for frames - £250
Alphamachine Guillotine- fillet pro trim cutter – mitre cuts slips up to 16mm wide - £150
Morso F – 48979 – manufactured 1990 excellent condition– includes 3 sets of blades and 3 spare springs - £550 SOLD
Excalibur 5000 – multi function – glass/MDF/Board cutter - £450
All equipment has been regularly calibrated and well maintained. Inspection encouraged.
Everything is priced to sell, I am not interested in haggling, unless you are making an offer for the lot