morso.jpg
morso
-
rich0410
- Posts: 13
- Joined: Mon 27 Feb, 2023 10:52 pm
- Location: london
- Organisation: blackheath frames
- Interests: framing!
Re: morso
hi all
is there a tool for this screw or is it just a pair of pliers to loosen?
both are jammed and i didnt want to damage the knurling if there is a tool
novice i know!!
thanks in advance
is there a tool for this screw or is it just a pair of pliers to loosen?
both are jammed and i didnt want to damage the knurling if there is a tool
novice i know!!
thanks in advance
-
vintage frames
- Posts: 1636
- Joined: Tue 12 Jun, 2012 6:05 pm
- Location: West Wales
- Organisation: https://www.dermotmcardle.co.uk/
- Interests: Making picture frames
- Contact:
Re: morso
That's an Allen Key screw.
Most hardware shops will sell you a set, usually on a key-ring.
Just pop the one, the right size, into the centre hole and turn. Might be tight but little or no chance of damaging the screw.
Most hardware shops will sell you a set, usually on a key-ring.
Just pop the one, the right size, into the centre hole and turn. Might be tight but little or no chance of damaging the screw.
