Page 1 of 1
Help with moulding
Posted: Tue 23 May, 2023 7:55 am
by photech54
Hi,
I have a client who wants me to match to the frame pictured.
The frame is dark green and measures 20mm deep x 35mm wide.
I've looked at Lion, Centrado, DJ Simons and Larson Juhl... but no luck.
Has anybody got any ideas where I might find some of this moulding please?
Thanks in advance,
Gary
Re: Help with moulding
Posted: Tue 23 May, 2023 9:00 am
by StevenG
That looks to be a hand finished frame
Re: Help with moulding
Posted: Tue 23 May, 2023 9:28 am
by vintage frames
'Been ages since anyone mentioned - Handfinishing!
Here's how to do that frame.
The moulding is A40 obeche from R&H.
Make the frame then buy this stain from E bay, Antique Green
https://www.ebay.co.uk/itm/325271062822 ... u2zAEajR
It's a good idea to also buy Walnut and Plum Mahogany. You can use these colours to match the green more if needed.
Think of Walnut as a base colour and use the Mahogany to warm it up a bit.
Apply two coats of stain with a cotton rag and when both are dry, you need to seal in the stain with shellac sealer
https://www.ebay.co.uk/itm/325553247019 ... UL6Nd1sH
You can rub this on with a rag if you wish, or use a brush.
Dilute it 50/50 meths and once again apply two coats.
Next day, rub the finish back with 0000 wire wool, wipe it clean and apply two coats of your favourite wax.
Re: Help with moulding
Posted: Tue 23 May, 2023 10:23 am
by StevenG
I find these tips very informative, thank you

Re: Help with moulding
Posted: Tue 23 May, 2023 11:33 am
by photech54
That's great, thanks everyone!
Job priced up, quote sent, quote accepted!
Thanks for your help!
Gary