WANTED - EXTENSION ARMS FOR CASSESE CS88
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
-
CreativePhotographer
- Posts: 41
- Joined: Sun 26 Mar, 2023 2:16 pm
- Location: Malvern
- Organisation: Anna Briggs Creative Photography
- Interests: Dogs, creative photography and walking..... lots of walking!!
- Location: Malvern
- Contact:
WANTED - EXTENSION ARMS FOR CASSESE CS88
Good morning! Does anyone have or know where I can get hold of any extension arms for a Cassese CS88? Thank you kindly. 
-
Justintime
- Posts: 1880
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Re: WANTED - EXTENSION ARMS FOR CASSESE CS88
"The Cs88 was originally designed to have extension wings that fitted into the slots in the top but these were never put into production hence no mention of them on the Cassese website." Written on a post by Mark Thornton of underpinnerspares.co.uk in 2010.
The best advice is to butt up your CS88 to a work table, raising your work table or underpinner to sit flush together. The foot pedal leg bolt can be moved to any leg of the underpinner allowing you to use it in any position with your preferred leg.
The best advice is to butt up your CS88 to a work table, raising your work table or underpinner to sit flush together. The foot pedal leg bolt can be moved to any leg of the underpinner allowing you to use it in any position with your preferred leg.
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer
-
Gesso&Bole
- Posts: 951
- Joined: Wed 24 Mar, 2010 3:35 pm
- Location: Nottingham
- Organisation: Jeremy Anderson Picture Frame Maker
- Interests: Framing pictures, testing out the latest gismos, and sharing picture framing knowledge
- Contact:
Re: WANTED - EXTENSION ARMS FOR CASSESE CS88
If the workbench approach doesn't work, you could try something like this
https://www.amazon.co.uk/Silverline-675 ... 702&sr=8-7
https://www.amazon.co.uk/Silverline-675 ... 702&sr=8-7
Jeremy (Jim) Anderson
Picture Framer and Framing Industry Educator
https://www.jeremyanderson.co.uk/
https://www.instagram.com/ja_picture_framer/
Picture Framer and Framing Industry Educator
https://www.jeremyanderson.co.uk/
https://www.instagram.com/ja_picture_framer/