Stapler
-
- Posts: 13
- Joined: Mon 23 Oct, 2023 10:19 pm
- Location: London
- Organisation: Atom Gallery
- Interests: Art
Stapler
I am trying to find what sort of staple gun fires staples at an angle through the backboard into the moulding to help keep the frame rigid when the budget does not extend to a sub frame. I have a suspicion they might all need an air compressor but at the moment I dont even know what one is called!
-
- Posts: 1370
- Joined: Tue 12 Jun, 2012 6:05 pm
- Location: West Wales
- Organisation: https://www.dermotmcardle.co.uk/
- Interests: Making picture frames
- Contact:
Re: Stapler
Its usually done with one of these guns -
https://pronailers.co.uk/products/omer- ... -4mm-16mm
You can fire these narrow crown staples in by holding the gun 1/2" back and at a slight angle to the moulding -
https://pronailers.co.uk/products/type- ... 53312136
You do need a compressor, but not a particularly big one.
https://pronailers.co.uk/products/omer- ... -4mm-16mm
You can fire these narrow crown staples in by holding the gun 1/2" back and at a slight angle to the moulding -
https://pronailers.co.uk/products/type- ... 53312136
You do need a compressor, but not a particularly big one.
Affordable Gilding Course for Professional Framers-https://www.dermotmcardle.co.uk/
https://www.instagram.com/dermotmcardle/
https://www.instagram.com/dermotmcardle/
-
- Posts: 13
- Joined: Mon 23 Oct, 2023 10:19 pm
- Location: London
- Organisation: Atom Gallery
- Interests: Art
Re: Stapler
thanks for that, we are not doing volume at all so I think I will stick with doing it with carefully placed screws, havent got the room for a compressor of any size anyway.