Alfamacchine U200P Pneumatic Underpinner
Posted: Wed 10 Jul, 2024 12:07 pm
Hi all,
6 month old U200P , purchased from Lion and used by our apprentice for learning and now not used as much.
really bargain priced machine can pin wide mouldings and hard woods.
still £1,500 + vat with Lion
£1200 inc vat posted to you , will include a few boxes of pins.
does show signs of use but otherwise like new
Ross@callaghanframing.co.uk
07811171734
details
https://www.lionpic.co.uk/p/42876/Alfam ... nderpinner
0632 Alfamacchine U200P Pneumatic Underpinner
Compact underpinner offering the power of pneumatic operation
Reduces operator fatigue and produces consistent results
Setup: Spring loaded pull pin mechanism - quickly adjust the top clamp to the height of the moulding
Clamping: Double piston top clamping mechanism distributes pressure evenly.
Operation: Pneumatic foot pedal activates clamping and V Nail insertion. After releasing the foot pedal the operator pushes the moulding back to the second insertion position and repeats the process.
More info
Inserts Alfamacchine Power Twist V Nails
Top L clamps have interchangeable polymer pads
Fixed back fences
Can be configured for back or front working
V Nail blocks are changed with a hex key. 7mm, 10mm & 12mm supplied, 5mm & 15mm are optional extras
Supplied with full boxes of 7mm, 10mm & 12mm V Nail
12 Month Warranty
Download the annotated diagram
Specification
Operation: Pneumatic
V Nail insertion positons: 2 fixed positions, unlimited in between
Max distance between V Nails: 180mm
Max moulding height: 80mm
Stand: Optional Extra
6 month old U200P , purchased from Lion and used by our apprentice for learning and now not used as much.
really bargain priced machine can pin wide mouldings and hard woods.
still £1,500 + vat with Lion
£1200 inc vat posted to you , will include a few boxes of pins.
does show signs of use but otherwise like new
Ross@callaghanframing.co.uk
07811171734
details
https://www.lionpic.co.uk/p/42876/Alfam ... nderpinner
0632 Alfamacchine U200P Pneumatic Underpinner
Compact underpinner offering the power of pneumatic operation
Reduces operator fatigue and produces consistent results
Setup: Spring loaded pull pin mechanism - quickly adjust the top clamp to the height of the moulding
Clamping: Double piston top clamping mechanism distributes pressure evenly.
Operation: Pneumatic foot pedal activates clamping and V Nail insertion. After releasing the foot pedal the operator pushes the moulding back to the second insertion position and repeats the process.
More info
Inserts Alfamacchine Power Twist V Nails
Top L clamps have interchangeable polymer pads
Fixed back fences
Can be configured for back or front working
V Nail blocks are changed with a hex key. 7mm, 10mm & 12mm supplied, 5mm & 15mm are optional extras
Supplied with full boxes of 7mm, 10mm & 12mm V Nail
12 Month Warranty
Download the annotated diagram
Specification
Operation: Pneumatic
V Nail insertion positons: 2 fixed positions, unlimited in between
Max distance between V Nails: 180mm
Max moulding height: 80mm
Stand: Optional Extra