Retirement looms and stuff to sell
Posted: Sun 08 Dec, 2024 11:11 am
The time for my retirement is fast approaching, I have already stopped taking any further orders and will close the shop doors on 21 December (maybe even 20 December). Immediately after Christmas I will begin to strip out the shop will have a number of items for sale (all by collection).
First stab at a list of possible sale items is:
2 x Nielsen Bainbridge 8 panel moulding carousels and just under 2.1m tall. They separate into 2 parts for easier transportation. £10.00 each.
Selwyns 5 panel (double sided) wall mounted moulding display, each panel is about 28cm wide x 98cm useable space, with a metal frame that screws to a wall. £20.00
2 x 5 drawer plan chests. Internal drawer sizes are 137cm wide x 79.5cm deep. I have mounted these one on top of the other with a worktop over and incorporated all into my counter/design table. They are not display quality plan chests unless you are adept at some finishing carpentry. £50.00 each.
2 x Stanley 400 mitre vices. I have these as display items but are both in working condition. One of the vices has a piece missing from one of the clamps but this does not prevent use. £50.00 each.
Moulding bundles. Each bundle will have 10 full lengths of same/similar moulding - great for a start up. Not sure of the quantity of bundles yet until I start sorting the stock. £20.00 a bundle – the actual value will far exceed that amount. Moulding from Larsen Juhl, Nielsen Bainbridge, Lion and Centrado
Nielsen Bainbridge aluminium sample display tracks – just screw vertically to a wall and hang any aluminium corner sample on the provided little brackets. I have 4 pieces each about 1.2m long. Free.
I already have homes for the CMC, Morso, Underpinner, Excalibur, Keencut Ultimat, Hot Press and Jet Mounter.
I am happy to provide photos in due course but just ask if you want to see something specific.
Edited - forgot to add we also have some DIY level stuff (used for training) - hand underpinner, Logan mount cutter, Nobex (I think) mitre saw, there may be some other items, will check next week.
First stab at a list of possible sale items is:
2 x Nielsen Bainbridge 8 panel moulding carousels and just under 2.1m tall. They separate into 2 parts for easier transportation. £10.00 each.
Selwyns 5 panel (double sided) wall mounted moulding display, each panel is about 28cm wide x 98cm useable space, with a metal frame that screws to a wall. £20.00
2 x 5 drawer plan chests. Internal drawer sizes are 137cm wide x 79.5cm deep. I have mounted these one on top of the other with a worktop over and incorporated all into my counter/design table. They are not display quality plan chests unless you are adept at some finishing carpentry. £50.00 each.
2 x Stanley 400 mitre vices. I have these as display items but are both in working condition. One of the vices has a piece missing from one of the clamps but this does not prevent use. £50.00 each.
Moulding bundles. Each bundle will have 10 full lengths of same/similar moulding - great for a start up. Not sure of the quantity of bundles yet until I start sorting the stock. £20.00 a bundle – the actual value will far exceed that amount. Moulding from Larsen Juhl, Nielsen Bainbridge, Lion and Centrado
Nielsen Bainbridge aluminium sample display tracks – just screw vertically to a wall and hang any aluminium corner sample on the provided little brackets. I have 4 pieces each about 1.2m long. Free.
I already have homes for the CMC, Morso, Underpinner, Excalibur, Keencut Ultimat, Hot Press and Jet Mounter.
I am happy to provide photos in due course but just ask if you want to see something specific.
Edited - forgot to add we also have some DIY level stuff (used for training) - hand underpinner, Logan mount cutter, Nobex (I think) mitre saw, there may be some other items, will check next week.