Page 1 of 1
rose and hollis A320
Posted: Wed 14 Oct, 2026 1:00 pm
by Compomouldings
I have a painting 3' x 4' on 12mm MDF to put into rose and hollis A320 (attached image)
How would people attach/fix the painting in
many thanks
Mark
Compo
Re: rose and hollis A320
Posted: Wed 14 Oct, 2026 5:16 pm
by Justintime
I would attach (glue) some blocks of wood at intervals to the back of the MDF and screw through the moulding into those.
Re: rose and hollis A320
Posted: Thu 15 Oct, 2026 12:33 pm
by vintage frames
Absolutely agree with Justin's concise reply.
Just to flesh it out a bit, there is about 25mm of headroom inside that moulding, so taking into account the 12mm thickness of the board, R&H F8 is ideal for chopping up into short blocks.
It has a thickness of 12mm and that would lift the art board up to the top surface of the moulding.
If one were to use Titebond Hide Glue, then the process would be fully reversible.