L-style | The ideal moulding search...

Get help and framing advice from the framing community
Post Reply
F91W
Posts: 28
Joined: Thu 26 Sep, 2024 1:28 pm
Location: South East
Organisation: TBC
Interests: Art

L-style | The ideal moulding search...

Post by F91W »

I'm looking for a hardwood L-style tray frame profile.

Specifically with a narrow face profile, ideally around 6mm.

Most I can see with major suppliers are around 12mm at the face.

The 2-way Ash (L1947) from Lion is 7mm - really nice, but has a step which doesn't work for this job.

Also the Linea range (L3622) from Lion has 6mm face, but they are veneered so unfortunately also won't work.

Bonus if it has a deep area for where the canvas would sit, allowing for extra-wide shadow gap.

Any ideas appreciated?

Thanks in advance!
Justintime
Posts: 2569
Joined: Sat 26 Sep, 2015 8:48 am
Location: West Wales
Organisation: George The Framer LLP
Interests: Gardening, design, electronic music, good food and beverages.
Contact:

Re: L-style | The ideal moulding search...

Post by Justintime »

Have a look at Centrado. They have a range of skinny oak veneer or laminate over pine. It looks and feels surprisingly real and comes in natural or two tone.
Justin George GCF(APF)
SW3850 fan
Posts: 4
Joined: Thu 18 Sep, 2025 5:08 pm
Location: Glasgow
Organisation: Rabbet
Interests: Framing

Re: L-style | The ideal moulding search...

Post by SW3850 fan »

Only decent solid contemporary tray frame moulding imo is a296 beech from rose and Hollis! 7mm face, no step like that lion one

Wish they made it in other wood species
Post Reply