BACK OF FRAME

BRUMMIEFRAMER · Post by **BRUMMIEFRAMER** » Fri 03 Jul, 2009 8:01 pm

Which is the best way to show a certificate of authenticity on to the back side of a frame, the frame is 16 x 10 inches the certificate is 8 x 6 inches.

Roboframer · Post by **Roboframer** » Fri 03 Jul, 2009 8:10 pm

Plastic sleeve from a loose leaf binder, cut the holes off to make it look nicer perhaps. Stick that to the back and put the cert in.

Some say certs should be kept separate.

Nigel Nobody · Post by **Nigel Nobody** » Fri 03 Jul, 2009 8:48 pm

I use mylar envelopes that I got from an archival supplier down here. I got them to make A4 and A2 size and I just attach them to the back with ATG.

Jonny2morsos · Post by **Jonny2morsos** » Fri 03 Jul, 2009 11:08 pm

Certificate holders are available. Customer of mine I do mounts for uses A5 size and prints his own certs. which he numbers and signs. I often photocopy, laminate the copy put that on back of frame and suggest the customer keeps the original in a safe place.

John.

RobinC · Post by **RobinC** » Sat 04 Jul, 2009 9:04 am

We use these

http://www.viking-direct.co.uk/catalog/ ... DDEmpty.do

They have no holes perforated in them so they look a lot better than binder sleeves - they are available in different sizes are fairly cheap, and look good when attached to the back of the frame.

RobinC

The Crofter · Post by **The Crofter** » Sun 05 Jul, 2009 3:44 pm

Try these polyprop pockets from Lion

http://www.lionpic.co.uk/Catalog/Produc ... earch=6339

The Framers Forum

BACK OF FRAME

BACK OF FRAME

Re: BACK OF FRAME

Re: BACK OF FRAME

Re: BACK OF FRAME

Re: BACK OF FRAME

Re: BACK OF FRAME