THREAD MOVED TO DISCUSSIONS BY MODERATOR
Hi Merlin Im searching for a copy of a fancy mount a choo choo train to be exact with carriages cut out so you can place photos behind them. I am using a vaiani supreme with corel draw 12 but have not got my head round the software yet. Would much appreciate any help you could give. Thanks Carlton
Train Designs
Re: Oval Plus 4
couple of suggestions - I am fairly sure there is a train mount already made up in the future matpro software - will have a look tomorrow. I am fairly sure that there is a ready configured train in coreldraws clip art - normally comes on cd with the program - again will have a look and get back to you.
- Merlin
- Posts: 1538
- Joined: Thu 05 Jun, 2003 5:50 pm
- Location: Cornwall
- Organisation: Merlin Mounts
- Interests: Aviation
Re: Oval Plus 4
Carlton which software version have you got.
In the new FMD library in the PLT Shapes section. Look under Vehicles. There are two Trains there.
As they are both .PLT's they could be adapted within Corel Draw.
If you are still struggling. Give me a PM or email of where you are stuck and I will help you out.
In the new FMD library in the PLT Shapes section. Look under Vehicles. There are two Trains there.
As they are both .PLT's they could be adapted within Corel Draw.
If you are still struggling. Give me a PM or email of where you are stuck and I will help you out.
John GCF
- Merlin
- Posts: 1538
- Joined: Thu 05 Jun, 2003 5:50 pm
- Location: Cornwall
- Organisation: Merlin Mounts
- Interests: Aviation
Re: Train Designs
Carlton. How did you get on with your Train Designs?
You have not come back so I presume all is OK.
You have not come back so I presume all is OK.
John GCF